4-7) Option Setting - Samsung RS2530B Service Manual

Table of Contents

Advertisement

OPERATING INSTRUCTIONS & INSTALLATION

4-7) OPTION SETTING

When the F-Room Temp Setting button and the Filter Reset button or the Lighting button are pressed for 12
seconds continuously,the display will be converted to the option setting mode.
Press for 12
seconds
1) For example, if you want to shift the Refrigerator standard temp by (26.6°F/-3 °C), proceed the following.
It is to shift the standard temperature.The F-Room standard temp is (-4°F/-20 °C)(MID).When it is shifted
(26.6°F/-3 °C) by using the option,the standard temp will be set to (-9.4°F/-23 °C) when the temp option is
changed, it will be controlled to (-9.4°F/-23 °C) internally even though it is set to MID on the display panel..So,
shifting the standard temperature by (26.6°F/-3 °C) means that it is controlled by (26.6 °F/-3 °C) increase than
the temp set on the display panel.
1-1) As shown in the draft,press the Freezer button and the FILTER RESET BUTTON OR LIGHTING
BUTTON for 12 seconds simultaneously.
- Except the Freezer &the Fridge LEDs, all LEDs will be turned off.
1-2) When it is changed to the option mode, all of the OPTION CATEGORY (I1~I5)and,the OPTION
SETTING (V1~V4) will display "0"(ALL OFF).
(The option should be set "0" for shipment, but this standard set value could be changed and shipped for
quality improvement during mass production.)
- The LED arrangements of the OPTION CATEGORY and the OPTION SETTING for different specs are
as follows.
I1
I2
I3
I4
I5
V1
V2
V3
V4
(For the Value Spec,the Dispenser LED is used due to the insufficient number of panel LEDs.)
RS2630A**
FRIDGE MIN
FRIDGE MID-M IN
FRIDGE MID
FRIDGE MID-M AX
FRIDGE MAX
FREEZER MIN
FREEZER MID-MIN
FREEZER MID
FREEZER MID-MAX
32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents