4-1-3) Load Status Display Function - Samsung RL60GG Series Service Manual

4. TROUBLESHOOTING

4-1-3) Load Status Display Function

1) At the normal operation, press the Freezer + Fridge buttons for 6 seconds.
Then, the Freezer and Freezer Temperature Display will blink in an interval of 0.5 second for 4 seconds.
2) At this time, release the Freezer + Fridge buttons and press the Alarm button (it sends out "Ding Dong"
sound.) Then, it shifts to the Load Display mode.
3) The Load Display function shows what MICOM signals come out from MAIN PCB.
But, it just indicates that there are MICOM signals coming out.
It does not necessarily mean that the related parts (Loads) are operating.
In other word, even though it shows a certain load working, the related part may not operate due to such
as a defective PCB relay or the defective part itself (it needs a confirmation).
4) The Load Display function lasts for 30 seconds and then it goes back to the normal operation.
5) The following image shows load locations with the 7-segment LEDs.
7-Segment
① Press the Freezer + Fridge
buttons for 6 seconds at the
①
same time, and while the Display
LEDs are blinking for 4 seconds,
release the buttons and
②
② Press the Alarm button once.
40
BAR-TYPE