Using The Hiface Evo Two As Windows Predefined Audio Device - M2TECH HIFACE EVO TWO User Manual

HIFACE EVO TWO
UNIVERSAL D-TO-D CONVERTER
REVISION P A – AUGUST 2015
R
9.3.4. Using the HIFACE Evo Two HIFACE Evo Two HIFACE Evo Two as Windows predefined audio device HIFACE Evo Two
When using certain players, such as Windows Media Player, or when listening to
streaming music from the Internet, it is necessary to set the HIFACE Evo Two as the
predefined audio output device. To this purpose it is necessary to access the Audio
Configuration utility from the Windows Control Panel (Fig. 32).
Here the user must select "hiFace Evo Two UAC2" as predefined device (as it's already
been done in the case shown in Fig. 32). From that moment on, every sound produced by
Windows or any application which relies on Windows to deliver its sound will be sent to the
HIFACE Evo Two .
It is also possible to tell the operating system which sampling frequency and resolution are
to be used to operate the HIFACE Evo Two . To this purpose, it is sufficient to click on the
"Properties" button, thus opening the window shown in Fig. 33.
Figura 32
45
M2Tech
www.m2tech.biz
Copyright © 2015, M2Tech Srl