Related Manuals for Allnet Synergy 21 S21256
Summary of Contents for Allnet Synergy 21 S21256
-
Page 1: Ethernet Switch
S21256 / S21289 User Manual S21256/S21289 5/8 10/100Mbps Ethernet Switch ALLNET GmbH... -
Page 2: Table Of Contents
1.4 LED Indicator Specifications ---------------------------- 5 2. Installation -------------------------------------------------------------- 6 2.1 Before Connecting to the Network -------------------- 6 2.2 Connecting to End Nodes -------------------------------- 7 2.3 Switch to Router or Switch ------------------------------- 8 3. Product Specification ----------------------------------------------- 9 ALLNET GmbH... -
Page 3: Introduction
In addition, it also supports MAC address auto-learning aging. Moreover, integrates 2K(S21256)/1K(S21289) MAC address table. Its easy setup and no network management will benefit you a lot. Exquisite and high-stable, it is your best choice to share the Internet. ALLNET GmbH... -
Page 4: Switch Features
Provides 5/8 10/100Mbps Auto-sensing RJ45 ports and supports Auto MDI/MDIX. Supports IEEE802.3x flow control for Full-duplex, and Backpressure flow control for Half-duplex. Supports non-blocking line speed forwarding. Supports store-and-forward switching method. Supports address auto-learning/aging function and integrates 2K(S21256)/1K(S21289) MAC address table. ALLNET GmbH... -
Page 5: Package Contents
The Rear Panel of the Switch includes 5/8 10/100Mbps RJ45 ports and one AC power port used for AC power input is located in the side panel of the Switch. Notice: Please use the delivery-attached power supply. If not, the Switch may be damaged. ALLNET GmbH... -
Page 6: Led Indicator Specifications
AC power — connector to ensure the correct connection of the power adapter. The other devices Green connect to the port of the Switch. Link/Act The port is transmit- ting or Green Blinking receiving data packets. ALLNET GmbH... -
Page 7: Installation
Don’t put heavy articles on the Switch. Power sockets and equipments should be within 1.5 meters of the Switch. Check power supply to confirm the safe connection. Make sure there’s adequate space for proper heat dissipation and adequate ventilation around the Switch. ALLNET GmbH... -
Page 8: Connecting To End Nodes
(MDI-II/MDI-X, speed, duplex) of the device to which is connected. Switch connecting to an end node Please refer to the LED Indicator Specifications. The Link/Act LEDs for each port lights green when the link is available. ALLNET GmbH... -
Page 9: Switch To Router Or Switch
S21256 / S21289 User Manual 2.3 Switch to Router or Switch Connecting to another router or switch Please refer to the LED Indicator Specifications. The Link/Act LEDs for each port lights green when the link is available. ALLNET GmbH... -
Page 10: Product Specification
0℃ ℃ ℃ ℃ -40℃ ℃ ℃ ℃ Temperature -40℃ ℃ ℃ ℃ -70℃ ℃ ℃ ℃ Storage Temperature 10%～ ～ ～ ～ 90% RH (no condensing) Working Humidity 5%～ ～ ～ ～ 95% RH (no condensing) Storage Humidity ALLNET GmbH... - Page 11 55024: 1998 + A1: 2001 + A2: 2003 61000-3-2:2006 61000-3-3:1995 + A1:2001 + A2:2005 This equipment is intended to be operated in all countries. This declaration is made by ALLNET Deutschland GmbH Maistr. 2 82110 Germering and can be downloaded from http://www.allnet.de/ce-certificates/...
- Page 12 Product specifications contained in this document are subject to change without notice. All other company or product names mentioned are used for identification purposes only and may be trademarks of their respective owners. Manufacturer: ALLNET GmbH ALLNET GmbH...
- Page 13 S21256 / S21289 User Manual ALLNET Deutschland GmbH Maistrasse 2 82110 Germering Tel. +49 89 89 4222 22 Fax +49 89 89 42 24 33 email: info@alldis.de ALLNET GmbH...
Need help?
Do you have a question about the Synergy 21 S21256 and is the answer not in the manual?
Questions and answers