Renault 2005 Megane Owner's Manual page 131

CRUISE CONTROL/SPEED LIMITER: cruise control function
2
1
5
System standby
The function is interrupted when
you:
- depress the brake pedal,
- depress the clutch pedal or shift
into neutral if the vehicle has an
automatic gearbox,
- press switch 4.
In all three cases, the cruising speed
remains stored and the message
"Stored" appears on the instrument
panel.
Recalling the cruising speed
If a speed has been stored, it is
possible to recall it by pressing
button 3 (the
message appears on the instrument
panel) on condition that you are
driving faster than 18 mph (30 m/h)
and that you are sure that the
3
driving conditions
(traffic, road
weather conditions, etc.).
4
Pressing button 2 or 5 reactivates
the cruise
without reactivating the stored
speed: the speed at which the
vehicle is moving is stored.
(continued)
"Cruise control"
are suitable
surface condition,
control function
Stopping the function
Press switch 1.
If you do this, the speed is not
stored.
The instrument panel indicator light
going out confirms that the function
is stopped.
There is no rapid reduction
in the vehicle's
when the cruise control
function is switched off or
to standby: you must depress the
brake pedal to brake.
speed
2.31