Exterior Lighting And Signals - Renault 2005 Megane Owner's Manual

EXTERIOR LIGHTING AND SIGNALS

1
2
Switching on the side
lights
Turn the end of switch stalk 1 until
the symbol is opposite mark 4.
The instrument panel will light up.
The brightness can be adjusted by
turning control knob 2.
Before driving at night, check that the electrical equipment is operating correctly and adjust the headlight
beams (if your vehicle is not carrying its normal load). In general, check that the lights are not obscured (by dirt,
mud, snow or objects which could cover them).
1.82
1
3
u
Switching on the dipped
beam headlights
Manual operation
Turn the end of switch stalk 1 until
the symbol is opposite mark 4.
In all cases, an indicator light on the
instrument panel comes on.
Automatic operation (depending on
vehicle)
With the engine running, the dipped
beam headlights are switched on or
off automatically depending on the
level of ambient light, without the
need to operate stalk 1 (position 0).
This function can be deactivated or
reactivated.
- To activate it, press button 3 for at
least four seconds. The message
4
"Auto lights ON" is displayed on
the instrument panel.
- To deactivate it, with the engine
switched off, press button 3 for at
least four seconds. The message
"Auto lights OFF" is displayed on
the instrument panel.
k
If stalk 1 is operated, it overrides
and cancels the automatic function
temporarily.