Connecting To The Ims (Sip) - Huawei eSpace IAD101H Quick Start Manual

eSpace IAD101H/102H/104H Integrated Access
Device
Quick Start

4.4 Connecting to the IMS (SIP)

The IAD101H/102H/104H can connect to the IMS directly or through SoftSwitch. If
the IAD connects to the IMS through SoftSwitch, configure the IAD according to the
scenario where the IAD connects to the IP PBX. This topic describes the scenario
where IAD users directly register with the IMS. After configuring data on the IMS,
configure the IAD101H/102H/104H so that the IAD101H/102H/104H can provide
voice services, including basic call and fax services.
Data Plan
You can obtain the connection data between the IAD and the IMS from the network
carrier or network administrator. The following describes how to enable the voice
function for an IAD101H/102H/104H user.
Table 4-5 Connection data between the IAD and the IMS
Item
Control protocol
used between the
IMS and the IAD
IP address of the
SBC server
IP address of the
IAD
SIP signaling port
number on the IAD
SIP signaling port
number on the IAD
Domain name of
the IAD
Issue 03 (2012-06-11)
Value
SIP protocol
192.169.1.40/255.255.25
5.0
192.169.1.62/255.255.25
5.0
5060
5060
abc.def.com
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Manual Configuration (CLI)
Parameter and Value on the
IAD
Protocol mode: SIP
IP address of the SIP server:
192.169.1.40
NOTE
The IP address of the SIP server
is the IP address of the P-CSCF
or SBC. Set the parameter based
on the site requirements.
IP address of the IAD:
192.169.1.62/255.255.255.0
NOTE
The IAD must be able to ping the
SIP server.
Server port number: 5060
Local port number: 5060
User domain name: abc.def.com
NOTE
The user domain name must be
unique.
19