D-Link DHP-310AV User Manual page 15

Section 3 - Configuration
Device Shows the name of the devices that have been
Name: discovered. The device's name is initially set by
the utility itself.
Location: Shows if the device is local or remote
Quality: Shows the network connection quality of the
connected device.
• Three squares - Suitable for HD video stream
connection.
• Two squares - Suitable for SD video stream
connection.
• One square - Suitable for data and Internet
activity connection.
Link Rate: Shows the link rate of the connected to the
PowerLine device.
MAC
Shows the MAC address of the connected
Address:
PowerLine device.
Firmware
Shows the firmware version of the connected
Version:
PowerLine device.
Factory
Click Factory Reset to reset the device back to
Reset:
factory default settings.
Firmware
Click Firmware Upgrade to improve the functionality
Upgrade:
of your powerLine device.
After you have downloaded the new firmware, click
Browse to locate the firmware update on your hard
drive. Click OK to proceed to firmware upgrade.
D-Link DHP-310AV User Manual 15