SNMPv3 Group configuration
Command: /cfg/sys/ssnmp/snmpv3/group <group number>
[SNMPv3 vacmSecurityToGroup 1 Menu]
model
uname
gname
del
cur
The following table describes the SNMPv3 Group Configuration Menu options.
Table 69 SNMPv3 Group Configuration Menu options
Command
model
usm|snmpv1|snmpv2
uname <1-32
characters>
gname <1-32
characters>
del
cur
SNMPv3 Community Table configuration
Command: /cfg/sys/ssnmp/snmpv3/comm <comm number>
[SNMPv3 snmpCommunityTable 1
index
name
uname
tag
del
cur
This command is used for configuring the community table entry. The configured entry is stored in the community
table list in the SNMP engine. This table is used to configure community strings in the Local Configuration
Datastore (LCD) of SNMP engine.
The following table describes the SNMPv3 Community Table Configuration Menu options.
Table 70 SNMPv3 Community Table Configuration Menu options
Command
index <1-32
characters>
name <1-32
characters>
uname <1-32
characters>
tag <1-255
characters>
del
cur
- Set security model
- Set USM user name
- Set group name
- Delete vacmSecurityToGroup entry
- Display current vacmSecurityToGroup configuration
Description
Defines the security model.
Sets the user name as defined in
user name can have a maximum of 32 characters.
Configures the name for the access group as defined in
/cfg/sys/ssnmp/snmpv3/access/name
maximum of 32 characters.
Deletes the
vacmSecurityToGroup
Displays the current
vacmSecurityToGroup
Menu]
- Set community index
- Set community string
- Set USM user name
- Set community tag
- Delete communityTable entry
- Display current communityTable configuration
Description
Configures the unique index value of a row in this table. The index can have a maximum
of 32 characters.
Defines a readable 32 characters string that represents the corresponding value of an
SNMP community name in a security model.
Defines the name as defined in
can have a maximum of 32 characters.
Configures a tag of up to 255 characters maximum. This tag specifies a set of transport
endpoints to which a command responder application sends an SNMP trap.
Deletes the community table entry.
Displays the community table configuration.
/cfg/sys/ssnmp/snmpv3/usm/name.
. The group name can have a
entry.
configuration.
/cfg/sys/ssnmp/snmpv3/usm/name
The
. The name
Command Line Interface 72