j5 create JUA250 User Manual page 23

B. Connect the USB Display Adapter into available USB port of PC or Notebook.
After Inserting an USB Display Adapter into a USB port, the systems will
automatically start the installation procedure and the prompt message will
pop-up on the task bar.
The Device driver software was installed properly, if you are going to install more USB
Display Adapters, repeat step A & B or restart computer
The functions of the USB Display Adapter will be activated after the computer
restarted. You might see the mirror display shown on the display device.
You can modify the corresponding position of each extend display via display
settings.
Go to "START" → "Control Panel" → "Appearance and Personalization" → "Display
Properties" →"Settings"
Note:
If your internal graphics card is Dual Display Ports.....
When Display Properties windows
appears, each monitor's number can
be identified by clicking "
" identify"
Drag the monitor to the location you
want.
22