j5 create JUA250 User Manual page 12

USB HDMI DISPLAY ADAPTER
Multi USB Display Adapter Installation
For installation of multiple USB Display Adapters, during the "Install Shield Wizard
complete" step, select "No, I will restart my computer later." and click Finish to
continue next step below
A. Connect all external display devices (monitor/ projector) to the HDMI /DVI
connector of USB Display Adapters and switch power on.
B. Connect the USB Display Adapter into an available USB port of a PC or Notebook.
After Inserting an USB Display Adapter into a USB port, the systems will
automatically start the installation procedure and the prompt message will pop-
up on the task bar.
The Device driver software was installed properly,
if you are going to install more USB Display Adapters, repeat step A& B or restart
computer.
11
USER MANUAL