j5 create JUA250 User Manual page 22

USB HDMI DISPLAY ADAPTER
6. After your computer is rebooted, connect the external display device (monitor/
projector) to the HDMI/DVI connector of USB Display Adapters and turn it on.
7. Connect the USB Display Adapter into an available USB port of a PC or Notebook,
After Inserting the USB Display Adapter into an USB port, the "Installing device
driver software" message will pop up.
An icon ( ) will be seen on the lower right toolbar.
The message pictures below shows Driver software is installed successfully.
If you're not going to install another USB Display Adapter, restart your PC. The
functions of the USB Display Adapter will be activated after the computer restarted.
Multi-USB Display Adapter Installation
For installation of multiple USB Display Adapters, during the "Install Shield Wizard
complete" step, select "No, I will restart my computer later." and click Finish to
continue next step below
A. Connect all external display devices (monitor/ projector) to the HDMI/DVI
connector of USB Display Adapters and switch power on.
21
USER MANUAL