1. Manuals
  2. Brands
  3. j5 create Manuals
  4. Adapter
  5. USB VGA/DVI Display Adapter
  6. User manual

j5 create USB VGA/DVI Display Adapter User Manual

Usb vga/dvi display adapter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USB VGA/DVI Display Adapter
User Manual
JUA210/230 V2.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the USB VGA/DVI Display Adapter and is the answer not in the manual?

Questions and answers

Related Manuals for j5 create USB VGA/DVI Display Adapter

Summary of Contents for j5 create USB VGA/DVI Display Adapter

  • Page 1 USB VGA/DVI Display Adapter User Manual JUA210/230 V2.0...

  • Page 2: Table Of Contents

    Table of Contents INTRODUCTION ........................3 Functions ..........................3 Highlighted Features ......................4 Required Environments ..................... 5 Physical Specifications ..................... 5 Resolutions and Color Depth ................... 6 Package Contents ......................8 GETTING STARTED –Notes for Before Installation ..............9 INSTALLATION FOR WINDOWS 7 ..................10 Device Driver Installation ....................

  • Page 3: Introduction

    USB DISPLAY ADAPTER USER MANUAL INTRODUCTION Thank you for purchasing the j5 create (JUA210 / JUA230) USB 2.0 Display Adapter! This adapter acts as an external graphics card for your MAC or PC. It allows you to add an additional VGA(JUA210) or DVI(JUA230) monitor/display through your USB 2.0 port.

  • Page 4: Highlighted Features

    Highlighted Features  Supports display resolution:1920 x 1200 @ 32bit  Plug-and-Play USB connectivity  Allows for up to 4 adapters in Windows  Allows for up to 2 adapters in Mac  Supports Display Modes: Primary, Extended, Mirror  Display Rotation: 0°, 90°, 180°, 270° ...

  • Page 5: Required Environments

    To ensure that your device is equipped with the most current driver, please visit our website at www.j5create.com and install the latest driver for this model. Physical Specifications Model: JUA210...

  • Page 6: Resolutions And Color Depth

    Power Consumption ≦500mA Physical Specification Housing Material Aluminum Dimensions Main body: 54(W)x 93(H)x14(D) mm Cable length: 130 mm Weight Approximately 72g Model: JUA230 Interface Host Interface USB 2.0 Type-A Connector Video Interface DVI-I Female Connector Power Power Mode Bus-powered Power Consumption ≦500mA Physical Specification Housing Material Aluminum...
  • Page 7 USB DISPLAY ADAPTER USER MANUAL 1600 X 1200 16,32 bits 1400 x 1050 16,32 bits 1280 x 1024 16,32 bits 1280 x 960 16,32 bits 1152 x 864 16,32 bits 1024 x 768 16,32 bits 800 x 600 16,32 bits...

  • Page 8: Package Contents

    Package Contents USB VGA Display Adapter(JUA210) Quick Installation Guide Driver CD with E-Manual USB DVI Display Adapter(JUA230) Quick Installation Guide Driver CD with E-Manual...

  • Page 9: Getting Started -Notes For Before Installation

    USB DISPLAY ADAPTER USER MANUAL GETTING STARTED –Notes for Before Installation  Install driver completely before inserting the USB Display Adapter USB Cable into your computer  Run the setup program as an administrator to avoid errors in installation  Uninstall the previous driver first before updating the latest driver ...

  • Page 10: Installation For Windows 7

    INSTALLATION FOR WINDOWS 7 Device Driver Installation This section illustrates the procedure for device driver installation for Windows 7. To start, insert the Driver CD into your computer’s CD-ROM drive. The setup program should be launched automatically. If Autorun does not begin, go to “Computer”, Click on your optical drive, and manually run the setup CD by double-clicking on “Setup.exe”...
  • Page 11 USB DISPLAY ADAPTER USER MANUAL 3. Driver installation proceeding…..
  • Page 12 4. When Install Shield Wizard is complete, select “Yes, I want to restart my computer now.” Click Finish to restart. 5. After your computer is rebooted, connect the external display device (monitor/ projector) to the VGA/DVI connector of the USB Display Adapter and turn on the display device.
  • Page 13 USB DISPLAY ADAPTER USER MANUAL If you’re not going to install another USB Display Adapter, restart your PC. The functions of the USB Display Adapter will be activated after the computer restarted. Multi USB Display Adapter Installation For installation of multiple USB Display Adapters, during the “Install Shield Wizard complete”...
  • Page 14 After Inserting an USB Display Adapter into a USB 2.0 port, the systems will automatically start the installation procedure and the prompt message will pop-up on the task bar. The Device driver software was installed properly, If you are going to install more USB Display Adapters, repeat step A& B or restart computer.
  • Page 15 USB DISPLAY ADAPTER USER MANUAL When the ‘Screen Resolution’ window appears, each monitor’s number can be identified by clicking “Identify.” Drag the monitor to the location you want.

  • Page 16: Verify Device Driver Installation

    Verify Device Driver Installation The following procedure helps you to verify the driver installation status of the USB Display Adapter. Right-click “My Computer”  “Manager”  “Device Manager” click “+” sign of “Display Adapter”  “Universal Serial Bus controllers” The picture below shows the installation process for a Single USB Display Adapter The picture below shows the installation process for a Multiple USB Display Adapter...
  • Page 17 USB DISPLAY ADAPTER USER MANUAL...

  • Page 18: Device Driver Un-Installation

    Device Driver Un-installation ※ Unplug the USB Display Adapter before un-installing the driver. Click Start→ Control Panel → Programs and Feature→ Uninstall or Change a Program Select j5 DIAPLAY ADAPTER... Click Uninstall A message will appear asking if you want to remove the selected application.
  • Page 19 USB DISPLAY ADAPTER USER MANUAL When the driver uninstall is completed select “Yes, I want to restart my computer now.” Click Finish to restart .

  • Page 20: Installation For Windows Vista

    INSTALLATION FOR WINDOWS VISTA Device Driver Installation This section illustrates the simple device driver installation procedure for a computer running Windows Vista operating system. When your computer is ready to use, insert the Driver CD into the CD-ROM drive. The setup program should be launched automatically, if Autorun does not begin, go to “Computer”, Click on your optical drive, and manually run the setup CD: Double Click on “Setup.exe”...
  • Page 21 USB DISPLAY ADAPTER USER MANUAL 3. Driver installation proceeding…..
  • Page 22 4. When Install Shield Wizard is complete, select “Yes, I want to restart my computer now.” and click Finish to restart. 5. After rebooting connect the external display device (monitor/ projector) to the VGA/DVI connector of USB Display Adapter and turn on the display device.
  • Page 23 USB DISPLAY ADAPTER USER MANUAL If you’re not going to install more USB Display Adapters, restart your PC. The functions of the USB Display Adapter will be activated once the computer restarted. Multi-USB Display Adapter Installation For installation of 2 or more USB Display Adapters, select “No, I will restart my computer later.”...
  • Page 24 The Device driver software was installed properly, if you are going to install more USB Display Adapter, Please repeat step A & B. or please restart computer. The functions of USB Display Adapter will be activated after the computer restarted. You would see the extended display is shown on the display device. You can modify the corresponding position of each extend display via display settings.
  • Page 25 USB DISPLAY ADAPTER USER MANUAL When the ‘Screen Resolution’ window appears, each monitor’s number can be identified by clicking “Identify.” Drag the monitor to the location you want.

  • Page 26: Verify Device Driver Installation

    Verify Device Driver Installation The following procedure helps you to verify the driver installation status of the USB Display Adapter Right- click “My Computer” “Manager”  “Device Manager” click “+” sign of “Display Adapter” & “Universal Serial Bus controllers” The picture below shows the installation process for a Single USB Display Adapter The picture below shows the installation process for a Multiple USB Display...
  • Page 27 USB DISPLAY ADAPTER USER MANUAL Adapter...

  • Page 28: Device Driver Un-Installation

    Device Driver Un-installation ※Unplug the USB Display Adapter before un-installing the driver 1. Click “Start”→ Control Panel → Programs and Feature→ Uninstall or change a program. Select j5 USB DIAPLAY ADAPTER XXX.. Click Uninstall 2. A message will appear asking if you want to remove the selected application.
  • Page 29 USB DISPLAY ADAPTER USER MANUAL 3. Driver un-installation proceeding…. 4. When the driver uninstall is completed select “Yes, I want to restart my computer now.” Click Finish to restart.

  • Page 30: Installation For Windows Xp

    INSTALLATION FOR WINDOWS XP Device Driver Installation This section illustrates the procedure for device driver installation for Windows XP. To start, insert the Driver CD into your computer’s CD-ROM drive. The setup program should be launched automatically. If Autorun does not begin, go to “Computer”, Click on your optical drive, and manually run the setup CD by double-clicking on “Setup.exe”...
  • Page 31 USB DISPLAY ADAPTER USER MANUAL 3. Driver installation proceeding….. 4. When Install Shield Wizard is complete, select “Yes, I want to restart my computer now.” Click Finish to restart.
  • Page 32 5. After your computer is rebooted, connect the external display device (monitor/ projector) to the VGA/DVI connector of USB Display Adapters and turn it on. 6. Connect the USB Display Adapter into an available USB 2.0 port of a PC or Notebook, After Inserting the USB Display Adapter into an USB 2.0 port, the “Installing device driver software”...
  • Page 33 USB DISPLAY ADAPTER USER MANUAL If you’re not going to install another USB Display Adapter, restart your PC. The functions of the USB Display Adapter will be activated after the computer restarted. Multi-USB Display Adapter Installation For installation of multiple USB Display Adapters, during the “Install Shield Wizard complete”...
  • Page 34 A. Connect all external display devices (monitor/ projector) to the VGA/DVI connector of USB Display Adapters and switch power on. B. Connect the USB Display Adapter into available USB 2.0 port of PC or Notebook. After Inserting an USB Display Adapter into a USB 2.0 port, the systems will automatically start the installation procedure and the prompt message will pop-up on the task bar.
  • Page 35 USB DISPLAY ADAPTER USER MANUAL You can modify the corresponding position of each extend display via display settings. Go to “START” → “Control Panel” → “Display Properties” →“Settings” When Display Properties windows appears, each monitor’s number can be identified by clicking “ “...

  • Page 36: Verify Device Driver Installation

    Verify Device Driver Installation The following procedure helps you to verify the driver installation status of USB Display Adapter Right-click “My Computer”  “Manager”  “Device Manager” click “+” sign of “Display Adapter”  “Universal Serial Bus controllers” The picture below shows the installation process for a Single USB Display Adapter...
  • Page 37 USB DISPLAY ADAPTER USER MANUAL The picture below shows the installation process for a Multiple USB Display Adapter...

  • Page 38: Device Driver Un-Installation

    Device Driver Un-installation ※Unplug the USB Display Adapter before un-installing the driver 1. Click Start→ Control Panel → Programs and Feature→ Uninstall or change a program Select j5 DIAPLAY ADAPTER ... Click Uninstall 2. Confirm windows will pop out, Click to continue. 3.
  • Page 39 USB DISPLAY ADAPTER USER MANUAL 4. When the driver uninstall is completed select “Yes, I want to restart my computer now.” Click Finish to restart .

  • Page 40: Installation For Mac Snow Le0Pard

    INSTALLATION FOR MAC SNOW LE0PARD Device Driver Installation Installing the device driver enables your computer’s operating system to recognize the USB Display Adapter. This section illustrates the device driver installation procedure for a computer running Snow Leopard. ※ Make sure the USB cable of USB Display Adapter is unplugged from your Mac Desktop or Mac Notebook before executing the setup program.
  • Page 41 USB DISPLAY ADAPTER USER MANUAL 2. Click “Continue” to proceed 3. Click “Continue” to proceed...
  • Page 42 4. Type in your password and click “OK” 5. Click “Continue Installation”...
  • Page 43 USB DISPLAY ADAPTER USER MANUAL 6. Installation is processing…This will take a few moments 7. Click “Restart” to complete the software installation 8. Connect the external display device (monitor/projector) to the VGA/DVI connector of USB Display Adapter and turn on the display device 9.

  • Page 44: Device Driver Un-Installation

    Device Driver Un-installation 1. Unplug the USB Display Adapter from the USB port 2. Run Un-installation program 3. Click “Open” to proceed 4. Click “Uninstall and restart” to proceed 5. Type in your password to allow un-installation and click OK to proceed.
  • Page 45 USB DISPLAY ADAPTER USER MANUAL 6. Click “restart “ restart your system...

  • Page 46: Functions Instructions: Windows 7

    FUNCTIONS INSTRUCTIONS: WINDOWS 7 This section describes the many functions provided by the USB Display Adapter. Display device’ here means any number of things such as CRT,LCD monitor, TV display, or projector. Display ID Smart Display Device ID Detection Window 7 OS supports VESA defined DDC/EDID. It will be shown as the Display device ID whenever it is attached to the USB Display Adapter.

  • Page 47: Display Resolution

    USB DISPLAY ADAPTER USER MANUAL Display Resolution Fast Access to Display Resolution setting The resolution list will show when moving the cursor on Display Resolution. Select the resolution you want for the USB Display Adapter. Default resolution: 1024 x 768 x 32 bit...

  • Page 48: Display Orientation

    Display Orientation The Orientation allows you to turn the display device, which is connected to USB Display Adapter...
  • Page 49 USB DISPLAY ADAPTER USER MANUAL Display Mode Extended mode (Default) This feature allows the display device attached to the USB Display Adapter to work as an “extended” display of the on-board screen. You can adjust the position by clicking “number” of the display first and select “Extend these displays”...
  • Page 50 Mirror mode-Duplicate This feature allows the same contents of the on-board screen to be displayed to the screen of the USB Display Adapter You can select “Duplicate these displays” and click “Apply”...
  • Page 51 USB DISPLAY ADAPTER USER MANUAL Primary mode When you want to switch the enabled monitor as main display and extend view to on-board screen. choose the “Number” of the main display you want it to be and make a “check” mark on “Make this my main display”.
  • Page 52 Off mode To turn one of the displays off: Select “Show desktop only on 1” and the 2 display will be off Select “Show desktop only on 2” and the 1 display will be off Super Utility A super utility provides more options; you can find the icon on the lower right task bar...

  • Page 53: Identify Monitors

    USB DISPLAY ADAPTER USER MANUAL Identify Monitors When “Identify Monitors” is selected, a serial number will be shown at the upper right corner of the display devices. You can see the serial number of each display when using the Hotkey function. Multi-Display Control Panel This unique feature provides a simpler working experience for the multi-display environments.

  • Page 54: Display Setting

    ※Setting Hotkeys For example: Move window to Display03, and automatically enlarge it to full screen. Choose “Move Active Window to Display03”, check “Move Window and Full screen”, and click Apply Display Setting Fast access to the system “Display Setting” Fix Position This function helps you arrange the positions of all the display locations you have set in Display >...

  • Page 55: Functions Instructions: Windows Vista/Xp

    USB DISPLAY ADAPTER USER MANUAL FUNCTIONS INSTRUCTIONS: WINDOWS VISTA/XP You can choose all the functions simply and directly only by clicking on this icon( ) seen on the lower right toolbar. Display ID Smart Display Device ID Detection The USB Display Adapter supports VESA defined DDC/EDID. The utility should show the display device ID whenever it is attached to the USB Display Adapter.
  • Page 56 Display Resolution Default Resolution: 1024 x 768x 32 bit The resolution list will be shown when moving the cursor on Display Resolution. Select the resolution you want for your display device which connected to USB Display Adapter.

  • Page 57: Display Rotation

    USB DISPLAY ADAPTER USER MANUAL Display Rotation The Display Rotation allows you to turn the display device, which is connected to USB Display Adapter. It is a useful function for some rotatable display device. There are 4 options available: 0 degree/ 90 degrees/180 degrees/ 270 degrees under the Extended or Primary display mode.
  • Page 58 Mirror Mode When Mirror selected, the screen of display device, which is connected to USB Display Adapter, will be the same as the main display, and Display Rotation will be disabled automatically. You can select either “Horizontal Flip”, or “Vertical Flip”. Primary Mode When Primary is selected, the display device, which is...

  • Page 59: Identify Monitor

    USB DISPLAY ADAPTER USER MANUAL When Off selected, it will disable the display of the USB Display Adapter. Identify Monitor When Identify Monitors is selected, a serial number will be shown at the upper right corner of attached display device. It helps you to know the serial number of each display, when using Hotkey function.

  • Page 60: Multi-Display Control Panel

    Multi-Display Control Panel When Multi-Display Control Panel is selected, the window of Multi- Display Control Panel will pop-up to enable the modification of the hotkeys. ※ Using Hotkey Default setting is Ctrl + Display No. Click the window you want to move on task bar to become active, and then press Hotkey.

  • Page 61: Display Setting

    USB DISPLAY ADAPTER USER MANUAL Display Setting Fast access to the system “Display Setting”...

  • Page 62: Display Resolution

    FUNCTIONS INSTRUTIONS: MAC SNOW LEOPARD Display Resolution Go to , and then “System Preferences From “System Preferences” click on the “Display” tab. You should see this screen.  On this screen, you can adjust the resolution, display mode and color range. Display Mode Click on the “arrangement”...

  • Page 63: Windows Arrangement

    USB DISPLAY ADAPTER USER MANUAL  You can move the menu bar to any display to assign any display to Primary.  If you cannot see the Display window to adjust your secondary monitor resolution, click on the “Gather Windows” button. TIP: To simplify using the USB Display Adapter, click “show display in menu bar.”...
  • Page 64  Space Click “Show Spaces in menu bar.” You should see the space number on the menu bar that you can choose any space on the list at any time.
  • Page 65 USB DISPLAY ADAPTER USER MANUAL F8: you will see the Space Layout with a single keystroke. You can draw any window to other space.  Exposé View different windows with a single keystroke.  F9 : view all open windows ...

  • Page 66: Trouble Shooting

    TROUBLE SHOOTING If you have any questions about using this device, follow the instructions below. If any further assistance is needed, please visit our website or call j5 create support hotline. Known Issues - Direct 3D is not supported under XP. It would be supported under Win 7 Aero mode - The Print screen function in the extend display currently is not supported under MAC OS.
  • Page 67 USB DISPLAY ADAPTER USER MANUAL - Cursor movement is slower when the mouse hovers on the video region of the Flash player, - Downsizing your screen landscape lower than 50 % will help smooth out Jerky video playback for videos running in Full Screen Mode - You may experience poor video performance on USB graphics devices with low spec PC systems.
  • Page 68 2. Online Support Please visit j5 create website (www.j5create.com) to find the latest software for your device. If you still experience the same issue, you can submit a trouble description via email service@j5create.com...

  • Page 69: Regulatory Compliance

    REGULATORY COMPLIANCE This equipment has been tested and found to comply with FCC Part 15 Subpart B § 15.109/15.107 Class B. Operation is subject to the following two conditions: • This device may not cause harmful interference • This device must accept any interference, including interference that may cause undesired operation of the device.

  • Page 70: Warranty Of J5 Create

    WARRANTY OF j5 create j5 create offers a limited 2-year warranty. User’s wear & tear damage are not included. The user shall call or email j5 create customer service with defect information of the product and obtain a return authorization number. Users are responsible for one way return freight cost and we will take care of one way freight back.

  • Page 71: J5 Create Products

    You can also use on keyboard and one mouse to work on both computers. Great for sharing information and for working on a small tablet or laptop while connected to a full sized keyboard and mouse. For more information, please visit our website http://www.j5create.com...

This manual is also suitable for:

Jua210Jua230

Table of Contents