Table of Contents
Advertisement
CEILING MOUNTED CASSETTE TYPE
Unified square panels
Panel size is the same for all models, FCQN71-140K.
It is easy to maintain a neat appearance when multiple
units are installed in the same room.
Optimal comfort and convenience
assured by air discharge modes
Note: Air direction is set to the standard position when the unit is shipped from the factory.
The position can be changed from the remote controller.
Standard setting
Air direction
Standard setting to
Desired
prevent draft.
situation
Auto-swing
5-levels
air direction
setting
Draft prevention
(In heating mode)
Auto air
direction control
*Closing of the corner discharge outlets is recommended.
Suitable for high ceilings
Even in spaces with high ceilings, a comfortable airflow is carried down to
the floor level.
Criteria for ceiling height and number of air discharge outlets
All round
flow
Standard
2.7 m
Ceiling
High ceiling
3.0 m
height
High ceiling
3.5 m
Note: Factory settings are for standard ceiling height and all-round flow.
High ceiling settings (1) and (2) are set with the remote controller.
Two selectable temperature-sensors
Both indoor unit and wired remote controller (option
temperature- sensors. Temperature sensing can be set at the unit or, to
further improve comfort level, closer to the target area at the wired remote
control. This feature requires initial setting by the installer.
*Temperature-sensor on indoor unit must be used when the air conditioner is controlled from another room.
**Wireless remote controller does not have a temperature-sensor.
Hot start (after defrost)
Switchable fan speed: High/Low
Timer selector
3
Same for
all models
Setting to prevent soiling of ceiling
Recommended for shops with
light coloured ceilings that
must be kept spotless.
Auto-swing between
Auto-swing between
15° and 60°
25° and 60°
Settable to 5 different
Settable to 5 different
levels between 15° and 60°
levels between 25° and 60°
At heating startup and thermo OFF, air discharge
is automatically set to a near horizontal 25˚ or 30˚
to prevent direct exposure to cool air drafts.
The air direction is set automatically to the
memorised position of the previous air direction.
Number of air discharge outlets used
71K
100K–140K
4-way
3-way
2-way
All round
4-way
flow
flow
flow
flow
flow
3.1 m
3.0 m
3.5 m
3.2 m
3.4 m
3.4 m
3.3 m
3.8 m
3.6 m
3.9 m
4.0 m
3.5 m
-
4.2 m
4.5 m
) contain
(BRC1E61)
Round Flow
Compact body and quiet operation
Indoor unit
High
35
71K
43
100K
44
125K
44
140K
Quick and easy to install
Just 256 mm high. Installable in tight
ceiling spaces
*
*1 298 mm high with 100K–140K
*2 303 mm high with 100K–140K
Easy height adjustment
Each corner of the unit has an Adjuster Pocket that
lets you easily adjust the unit's suspended height.
Note: If the wireless remote control option is installed, a light receptor
unit is housed in one of the adjuster pockets.
All models can be installed without
using lifter because of the light weight.
Can be installed in
any direction
Since the orientation of
the intake grill can be
adjusted after installing,
the direction of the intake
grill lines can be unified
when multiple units
are installed.
3-way
2-way
flow
flow
3.6 m
4.2 m
Drain pump is equipped as standard
4.0 m
4.2 m
4.2 m
-
accessory with 850 mm lift.
Transparent drain
socket
Easier connection with the centralised
control system
Low gas pressure detection
dB(A)
Low
28
Note : Anechoic chamber
conversion value, measured
32
according to JIS parameters
and criteria. During
34
operation these values are
somewhat higher owing to
36
ambient conditions.
(71K)
265 mm
256 mm
1
*
850 mm
175 mm
2
*
Hide quick links:
Advertisement
Table of Contents
