Fujitsu M4097D Cleaning And Maintenance page 33

Slide the Pad Assembly to the
3
left and pull it towards you.
Then, being careful not to hook
the Pad spring, remove the
Pad Assembly.
NOTE
Hold both ends of the Pad assembly as
shown in the left photo.
CAUTION
Don't hold the sensor arm with the Pad
assembly.
Attach the Pad Assembly to
4
the ADF in the reverse
sequence of step 3.
NOTE
Fit the Pad assembly pin into the larger hole,
then slide it to the right until it stops.
5
Close the ADF.
Pad assembly
3-3