Fujitsu M4097D Cleaning And Maintenance page 28

Cleaning the Pick Arm Rollers
Pull the ADF lever to open the
1
ADF.
Moisten a cotton swab or Dry
2
cloth with F1 or F2 Cleaner.
Wipe the small Plastic rollers
3
at the tip of the Pick Arm.
Wipe the small Plastic rollers
4
and the Pick Arm with a clean,
dry cloth to dry them.
NOTE
When non-carbon paper is used, the Pick Arm rollers may become dirty with a black
substance. Use Cleaner F2 to remove the contamination.
CAUTION
1. Don't wipe the pad rubbers with the F2 cleaner.
2. Don't apply the F2 cleaner to the pad rubber.
2-8