Part Names And Functions - NEC XT4100 User Manual

1. Part Names and Functions

Digital Input Terminal Panel
Remote Sensor
PC Card Access
Indicator
PC Card Slot
Insert a PC memory
card here to upgrade
the projector system
software or copy
data
Lens (Optional)
Input Terminal Panel
* To turn on the main power to the projector, press the switch to the ON
position (I) and the POWER indicator on the rear panel will turn or-
ange in color.
Press to the OFF position (0) to turn the main power off.
NOTE: When turning off the main power, first return the projector to the standby
condition by pressing the POWER OFF button on the remote control or the POWER
button on the rear panel and then turn off the main POWER switch. These pro-
cedures are necessary to protect your projector and the connected equipment.
Power Switch (Main power)*
AC INPUT
Connect the supplied
power cable here (AC
100-120 / 200-240V).
Stacking Pad (4 pcs)
Ventilation (in)
Ventilation (in)
Controls
Ventilation (in)
Release Lever (both sides)
Foot
E – 2
Carrying Handle
Ventilation (out)
Ventilating duct (out)
Ventilation (out)