Projector Orientation - NEC XT4100 User Manual

High light output projection system
Hide thumbs Also See for XT4100:
Table of Contents

Advertisement

Projector Orientation

An image can be projected from in front or behind a screen, and the
projector can be installed on the ceiling*.
Ceiling Front Projection
Use [Projector Options]
[Setup]
"Ceiling Front". (See page E-36.)
Ceiling Rear Projection
Use [Projector Options]
[Setup]
"Ceiling Rear". (See page E-36.)
Desktop Rear Projection
Use [Projector Options]
[Setup]
"Desktop Rear". (See page E-36.)
[Page 1]
[Orientation] to select
[Page 1]
[Orientation] to select
Transparent screen
[Page 1]
[Orientation] to select
Transparent screen
WARNING
• Installing your projector on the ceiling must be done by a qualified
technician. Contact your NEC dealer for more information.
* Do not attempt to install the projector yourself.
• Only use your projector on a solid, level surface. If the projector falls
to the ground, you can be injured and the projector severely dam-
aged.
• Do not use the projector where temperatures vary greatly. The pro-
jector must be used at temperatures between 40 F (5 C) and 95 F
(35 C).
• Do not expose the projector to moisture, dust, or smoke. This will
harm the screen image.
• Ensure that you have adequate ventilation around your projector so
heat can dissipate. Do not cover the vents on the projector.
E – 15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xt5100

Table of Contents