Part Names And Functions; Projector - NEC DT100 User Manual

Part Names and Functions

Adjustment panel
These buttons are provided for setting the
adjustment menu.
See page E-13 for details.
Operation panel
This panel houses the buttons
and indicators used for normal
control of the projector. The
lamp ON/OFF button, input
device switching button, OHP
enlargement button, OHP
brightness button and
indicators are located here.
See page E-12 for details.
Terminal panel
This panel houses the terminals and
connectors for connecting the
projector to a PC, video, or other
device.
See page E-11 for details.
Air vent A (Air filter)
Cool air is drawn in from outside via this vent.
An air filter is provided to prevent dust from
entering the inside of the projector.
See page E-47 for details.
Adjustable feet
Used for adjusting the vertical angle at which
images are projected and the horizontal balance.
Rotate counter clockwise to extend, clockwise to
retract.
See page E-16 for details.

Projector

Part Names and Functions
Zoom adjuster
Rotate to adjust the screen size.
See page E-26 for details.
Materials cover
Used for holding down flat materials or
printed matter placed over the scanner.
See page E-29 for details.
Handle
Remote control
sensor
Lens
Images are projected from here.
Focus adjuster
Rotate to adjust the focus.
See page E-27 for details.
Tilt adjust button
Press to adjust the tilt foot.
See page E-16 for details.
E-9