Table of Contents
Advertisement
INTRODUCTION
This section introduces you to your new XT5100/XT4100 Projector, pro-
vides a list of materials that comes with your projector and describes
the features and controls.
Introduction to the XT5100/XT4100 Projector
The XT5100/XT4100 is one of the finest, most technically advanced
projectors available today. The XT5100/XT4100 enables you to project
exceptionally bright, precise images up to 500 inches across (measured
diagonally) from your PC or Macintosh computer (desktop or notebook),
VCR, document camera, laser disc player, DVD player and even an HD
VCR or HD laser disc player.
You can use the projector on a tabletop or cart, you can permanently
mount it on a ceiling*, or you can use the projector to project images
from behind the screen. The remote control can be used in a wired or
wireless configuration.
Features you'll enjoy :
• A high-performance 1.0 KW Xenon lamp that delivers 5,000 ANSI
(High-Bright mode: XT5100) / 3,500 ANSI (Variable mode at max:
XT4100) lumens with a lamp life of 1500 hours.
TM
• NEC's unique DLP
based light engine offers true color reproduc-
tion.
• The XT5100/XT4100 can accommodate any picture size from 80 to
500 inches (measured diagonally).
• The XT5100/XT4100 projects images with uniform brightness while
colors remain true to their original source.
• The projector can be triple stacked without an external frame, pro-
ducing bright images of 15,000 (XT5100) / 10,500 (XT4100) ANSI
lumens. In addition, triple stacking offers built-in redundancy.
• An image can be projected from in front or behind a screen, and the
projector can even be installed on the ceiling*.
• Supports RGB digital, HDTV and DVD signals as well as most IBM
VGA, S-VGA, XGA, SXGA, UXGA (scaling), Macintosh or any other
RGB signals within a horizontal frequency range or 15 to 107 kHz
and a vertical frequency range of 24 to 120 Hz. This includes
NTSC3.58, PAL, PAL60, SECAM, NTSC4.43, Y/C and 1080p, 1080i,
720p and 480p HDTV standard video signals.
• Built-in telecine detection enables 3:2 pull-down correction with no
external processing necessary, eliminating jitter and artifacts to allow
for original film source motion quality.
• A newly designed menu system provides for easy setup and opera-
tion of the projector.
• The remote control can be used wired or wireless.
* Installing the projector on the ceiling must be done by authorized
NEC technicians.
Consult your NEC dealer for more information.
Digital Light Processing and DLP are trademarks of Texas Instruments.
Getting Started
The fastest way to get started is to take your time and do everything
right the first time. Taking a few minutes now to review the manual may
save you hours later on. At the beginning of each section of the manual
you'll find an overview. If the section doesn't apply, you can skip it.
What's In The Box?
Make sure your box contains everything listed. If any pieces are miss-
ing, contact your dealer. Please save the original box and packing ma-
terials if you ever need to ship the projector.
• XT5100/XT4100 Projector
• Remote Control with Remote Cable (wireless/wired).
• DVI-D Cable (XT5100 only)
• Power Cable (for North America and for Europe)
• Two AA Batteries
• User Manual
• CompactFlash Memory Card (8MB) with Adapter
E – 1
Advertisement
Table of Contents
