Table of Contents
Advertisement
External Control
Power Requirement
Input Current
Power Consumption
Mechanical
Installation
Dimensions
Net Weight
Environment
Regulations
*1: Permissible deviation for RGB convergence (Pixel deviation) is 1/2 pixel or less at center; 1 pixel or less around the perimeter (when projection
upward angle is 0˚).
*2: When using the zoom lens, it is recommended that the projector is positioned at an angle of from -15 to +15 degrees from the horizontal.
Specifications are subject to change without notice.
Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments.
RS232C(1) D-sub 9 pin
Contact Closure
Switcher
(2) D-sub 15 pin In/Out
Addressable Remote Control (wired / wireless)
100-120 / 200-240 VAC, 50/60Hz
11 A / 7.3 A
1.0 kW / 1.5 KW
Orientation:
Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear
Stacking:
Up to 3 projectors can be gravity stacked
22.0" (W) x 26.9" (D) x 11.8" (H) / 560 mm (W) x 682 mm (D) x 300 mm (H)
with lens hood and foot (not including handle, stacking pad and protrusions)
95 lb (43Kg) (without lens)
Operational Temperature
Humidity: 20-80% non-condensing
Storage: 14˚ to 122˚F / -10˚ to 50˚C
Humidity: 20-80% non-condensing
USA
UL 1950
FCC Class A
Canada
CSA950 ( C-UL )
Europe
EN60950
EN55022 Class A
Japan
J60950
VCCI
Oceania
EN60950
AS/NZS3548
Asia
EN60950
CISPR22
40˚ to 95˚F / 5˚ to 35˚C,
EN55024
Class A
Class A
E – 41
EN61000-3-2
EN61000-3-3
Advertisement
Table of Contents
