Optimizing Computer Signal Automatically; Adjusting The Image Using Auto Adjust; Turning Up Or Down Volume - NEC NP 610 User Manual

 Optimizing Computer Signal Automatically

Adjusting the Image Using Auto Adjust

Optimizing a computer image automatically.
Press the AUTO ADJ. button to optimize a computer image automatically.
This adjustment may be necessary when you connect your computer for the first time.
[Poor picture]
[Normal picture]
NOTE:
Some signals may take time to display or may not be displayed correctly.
• The Auto Adjust function does not work for component, video, and DVI digital signals.
• If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE]
manually. (→ page 64, 65)

 Turning Up or Down Volume

TIP: When no menus appear, the  and  buttons on the projector cabinet work as a volume control.
Increase volume
Decrease volume
3. Projecting an Image (Basic Operation)
MENU
LAMP
STATUS
SOURCE AUTO ADJ.
Sound level from the speaker can be adjusted.
L-CLICK R-CLICK
MOUSE
VIDEO COMPUTER AUTO ADJ.
1
S-VIDEO
ECO MODE
2
VOLUME ASPECT HELP
PICTURE FREEZE
MENU
LAMP
STATUS
SOURCE AUTO ADJ.
37
L-CLICK R-CLICK
MOUSE
VIDEO COMPUTER AUTO ADJ.
1
S-VIDEO
ECO MODE
2
VOLUME ASPECT HELP
PICTURE FREEZE