NEC NP 610 User Manual page 62

TIP:
Uninstalling Virtual Remote Tool
Preparation:
Exit Virtual Remote Tool before uninstalling. To uninstall Virtual Remote Tool, the Windows user account must have
"Administrator" privilege (Windows Vista and Windows 2000) or "Computer Administrator" privilege (Windows XP).
• For Windows Vista
1 Click "Start" and then "Control Panel".
The Control Panel window will be displayed.
2 Click "Uninstall a program" under "Programs"
The "Programs and Features" window will be displayed.
3 Select Virtual Remote Tool and click it.
4 Click "Uninstall/Change" or "Uninstall".
• When the "User Account Control" windows is displayed, click "Continue".
Follow the instructions on the screens to complete the uninstallation.
• For Windows XP/2000
1 Click "Start" and then "Control Panel".
The Control Panel window will be displayed.
2 Double-click "Add / Remove Programs".
The Add / Remove Programs window will be displayed.
• On Windows 2000, double-click "Uninstall a program".
3 Click Virtual Remote Tool from the list and then click "Remove".
Follow the instructions on the screens to complete the uninstallation.
Step 2: Connect the projector to the computer
1 Use the supplied VGA signal cable to connect the COMPUTER 1 IN connector of the projector directly with
the monitor output connector of the computer.
2 Connect the supplied power cable to the AC IN of the projector and the wall outlet, and then press the Main
Power switch to turn on the main power.
The projector is in the standby condition.
COMPUTER 1 IN
TIP:
• When Virtual Remote Tool starts for the first time, "Easy Setup" window will be displayed to navigate your connections.
Main Power Switch
VGA signal cable (supplied)
AC Input
Power cable (supplied)
53
4. Convenient Features
→ To wall outlet