NEC NP 610 User Manual page 101

Nec electronics america portable projector user manual
Hide thumbs Also See for NP 610:
Table of Contents

Advertisement

Model Number
NP610S/NP510WS
Optical
LCD Panel
Resolution
Lens
Lamp
Light Output*
*
2
3
Contrast Ratio*
3
(full white: full black)
Image Size (Diagonal)
Projection Distance
Projection Angle
Electrical
Inputs
Outputs
PC Control
Wired LAN Port
External Control
Color Reproduction
Compatible Signals*
5
Video Bandwidth
Horizontal Resolution
Scan Rate
Sync Compatibility
Built-in Speaker
Power Requirement
Input Current
Power Consumption
NP610S
0.63 inch LCD with Micro Lens Array
(Aspect Ratio 4:3)
1024 × 768 pixels*
1
Fixed zoom and manual focus
Digital Zoom Ratio= 1.2
F2.3 f= 9.7 mm
230W AC (170W in ECO Mode)
2600 lumens (approx. 70% in ECO Mode)
600:1
60"–110"/ 1.52 m–2.79 m
35"–66"/ 0.9 m–1.7 m
29.1°–29.4°
*1 Effective pixels are more than 99.99%.
*2 This is the light output value (lumens) when the [PRESET] mode is set to [HIGH-BRIGHT]. If any
other mode is selected as the [PRESET] mode, the light output value may drop slightly.
*3 Compliance with ISO21118-2005
1 RGB/Component (D-Sub 15 P), 1 RGB (Digital/Analog, DVI-I 29 P, HDCP*
1 S-Video (DIN 4 P), 1 Video (RCA), 1 (L/R) RCA Audio, 2 Stereo Mini Audio
1 RGB (D-Sub 15P), 1 Stereo Mini Audio
1 PC Control Port (D-Sub 9P)
RJ-45
RS232, IR, Wired LAN
16.7 million colors simultaneously, Full color
Analog: VGA/SVGA/XGA/WXGA/WXGA+/SXGA/SXGA+/UXGA
480i/480p/576i/576p/720p/1080i
Digital: VGA/SVGA/XGA/WXGA/SXGA
RGB: 80 MHz (Max.)
540 TV lines: NTSC/NTSC4.43/PAL/PAL-M/PAL-N/PAL60
300 TV lines: SECAM
Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over)
Vertical: 50 Hz to 120 Hz
Separate Sync / Composite Sync / Sync on G
7W (monaural)
NP610S: 100–240V AC, 50/60Hz
NP610SG: 200–240V AC, 50/60Hz
NP610S: 3.8–1.5A
NP610SG: 1.8A
312W(100-130V AC)/294W(200-240V AC) in OFF for ECO MODE/237W(100-130V AC)/228W(200-240V
AC) in ON for ECO MODE/10W in NORMAL Mode for STANDBY Mode/0.6W(100-130V AC)/0.7W(200-
240V AC) in POWER-SAVING Mode for STANDBY MODE
*4 What is HDCP/HDCP technology?
HDCP is an acronym for High-bandwidth Digital Content Protection. High bandwidth Digital Content
Protection (HDCP) is a system for preventing illegal copying of video data sent over a Digital Visual
Interface (DVI).
If you are unable to view material via the DVI input, this does not necessarily mean the projector
is not functioning properly. With the implementation of HDCP, there may be cases in which certain
content is protected with HDCP and might not be displayed due to the decision/intention of the HDCP
community (Digital Content Protection, LLC).
*5 An image with higher or lower resolution than the projector's native resolution (NP610S: 1024 × 768 /
NP510WS: 1280 × 800) will be displayed with Advanced AccuBlend.
0.59 inch LCD with Micro Lens Array
(Aspect Ratio 16:10)
1280 × 800 pixels*
2100 lumens (approx. 70% in ECO Mode)
57"–104"/1.45 m–2.64 m
NP510WS: 100–240V AC, 50/60Hz
NP510WSG: 200–240V AC, 50/60Hz
NP510WS: 3.8–1.5A
NP510WSG: 1.8A
92
7. Appendix
NP510WS
1
supported),
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents