NEC NP 610 User Manual page 79

Setting Closed Caption [CLOSED CAPTION]
This option sets several closed caption modes that allow text to be superimposed on the projected image of Video
or S-Video.
OFF ........................ This exits the closed caption mode.
CAPTION 1-4 ......... Text is superimposed.
TEXT 1-4 ................ Text is displayed.
NOTE:
• The closed caption is not available under the following conditions:
- when messages or menus are displayed.
- when an image is magnified, frozen, or muted.
• Doing the following may cause portions of superimposed text or closed caption to be truncated.
If this occurs, try to change correction amount or selection to place the superimposed text or closed caption within the
screen.
- Using the [DIGITAL ZOOM] or [KEYSTONE] function to correct the image excessively
- Selecting [16:10] or [16:9] from [ASPECT RATIO]
- Using the [POSITION] (not available on NP510W/NP410W/NP510WS)
Selecting Menu Language [LANGUAGE]
You can choose one of 21 languages for on-screen instructions.
NOTE: Your setting will not be affected even when [RESET] is done from the menu.
[MENU]
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: COLOR and MONOCHROME.
Turning On / Off Source Display [SOURCE DISPLAY]
This option turns on or off input name display such as COMPUTER 1, COMPUTER2(DIGITAL), COMPUTER 2(ANA-
LOG), VIDEO, S-VIDEO and No Input to be displayed on the top right of the screen.
On NP405/NP305, the input name will be displayed as COMPUTER 1, COMPUTER2, VIDEO, and S-VIDEO.
Turning ON/OFF Control ID [ID DISPLAY]
(Available only when the optional remote control NP02RC is used)
ID DISPLAY ........... This option turns on or off the ID number which is displayed when the ID SET button on the remote control
is pressed.
70
5. Using On-Screen Menu