Selecting The Tri-Amp Mode; Using The Timer; Using The Sleep Timer - Panasonic SC-AK48 Operating Instructions Manual

A
1
1
LOW
2
SOUND CONTROL JOG
B
26
RQT5321
TRI-AMP CONTROL
MID HIGH TRI-AMP
Indicator

Selecting the TRI-AMP mode

The tri-amp control controls sound quality by allowing you to adjust
the level of the amplifiers for the low, mid and high regions.
It is a type of manual equalizer and cannot be used with the other
TRI-AMP
types of equalizers.
Press [LOW], [MID] or [HIGH] to display "TRI-AMP".
The [TRI-AMP] indicator lights.
(Within 5 seconds)
Dial [SOUND CONTROL JOG] to set the level as
desired.
2
Repeat the above steps to set other frequency bands accordingly.
The original display is restored on the display panel in about 5 seconds.
To release the mode
Dial [SOUND CONTROL JOG] to turn [TRI-AMP] indicator off.
Notes
•
TRI-AMP mode setting is stored automatically. It is recalled when
"TRI-AMP" is next selected.
•
All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.

Using the timer

Using the sleep timer

This timer turns your system OFF at the set time (Max. 2 hours,
settable at 30-minute interval). It lets you fall asleep listening to music.
by remote control only
Preparation
Switch on the power.
The figure shows how to set the system to standby mode after 30
minutes.
While enjoying the desired source:
Press [SLEEP] to select the desired time.
Every time you press the button:
SLEEP 30 SLEEP 60
The system is turned off after the set time has elapsed.
To cancel the sleep timer:
Press [SLEEP] to select "SLEEP OFF".
To confirm the remaining time:
(only while system is ON)
Press [SLEEP].
To change the time remaining during operation:
Press [SLEEP] to show the remaining time then press [SLEEP] to
select the desired time.
Notes
•
The sleep timer turns OFF automatically the moment you attempt
to edit-record a CD using CD Manager function.
•
The sleep timer can be used in combination with the play/record
timer.
The sleep timer always has priority.
Be sure not to overlap timer settings.
A
SLEEP 90 SLEEP 120 SLEEP OFF
B