Step 1 Assembling The Speakers - Panasonic SC-PT570 Operating Instructions Manual

RQTX0229-B_eng.book Page 6 Wednesday, December 24, 2008 12:29 PM
step 1 Assembling the speakers
Front speaker
[PT570]
Front and surround speakers
[PT870]
Make sure you have all the indicated components before starting assembly, setup, and connection.
≥ Keep the screws out of reach of children to prevent swallowing.
≥ For optional wall mount, refer to page 26.
[PT570]
2 Front speakers
[PT870]
2 Front speakers
2 Surround speakers
1
2
Leave about 120 mm.
Speaker assembly option
Thread the speaker cable through
the base.
You can remove and use the
cable from the stand. To reattach
the cable, refer page 26.
Preventing the speakers from falling
≥ You will need to obtain the appropriate screw eyes to match the walls
or pillars to which they are going to be fastened.
≥ Consult a qualified housing contractor concerning the appropriate
procedure when attaching to a concrete wall or a surface that may not
have strong enough support. Improper attachment may result in
damage to the wall or speakers.
e.g. Front speaker
String (not included)
Thread from the wall to the speaker and tie tightly.
Rear of the
6
speaker
[PT570]
2 Stands (with cable)
[PT870]
4 Stands (with cable)
Position the cable
between the ridges.
Attach the speaker.
Leave about
120 mm.
Approx.
150 mm
Screw eye
Wall
(not included)
Preparation
≥ To prevent damage or scratches, lay down a soft cloth and perform
assembly on it.
≥ For assembly, use a Phillips-head screwdriver (not included).
[PT570] 2 Bases [PT570] 8 Screws
4 Bases
[PT870] [PT870]
Slide into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push!
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
Push!
j: Blue
Press into the groove.
Tighten securely.
Slide into
the groove.
Caution
Do not stand on the base. Be cautious when children are near.
e.g. Front speaker
DO
NOT
16 Screws
2
1