Selecting The Source By The Remote Control; Enjoying Surround Sound Effects - Panasonic SC-PT570 Operating Instructions Manual

RQTX0229-B_eng.book Page 14 Wednesday, December 24, 2008 12:29 PM
Selecting the playback source (continued)
DVD
DVD
USB, iPod
SETUP
SETUP

Selecting the source by the remote control

DVD/CD (
DVD
Each time you press the button:
RADIO
FM (
EXT-IN
AM (
AUX
D-IN
§
USB (
USB
iPod (
iPod
Enjoying sound from all speakers and various sound
effects
SURROUND
SURROUND
SETUP
SETUP,
-CH SELECT
─CH SELECT
≥ The following sound effects may not be available or have no effect with
some sources, or when headphones are used (
≥ You may experience a reduction in sound quality when these sound effects
are used with some sources. If this occurs, turn the sound effects off.

Enjoying surround sound effects

SURROUND OUTPUT indicator on the main
SURROUND
unit will light up when there is surround sound
effect.
Each time you press the button:
STANDARD:
Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CH:
You can enjoy sound from the front speakers, as
well as the surround speakers even when playing
a 2-channel sound or non-surround sound.
MANUAL: (
14
USB RADIO
RADIO, EXT-IN
iPod EXT-IN
START
11)
12)
12)
: For audio input through the AUX
§
terminal.
: For audio input through the
§
OPTICAL IN terminal. ( right)
"(TV)" will appear beside "AUX" or
"D-IN", indicating the TV audio setting for
VIERA Link "HDAVI Control" ( 22).
24)
25)
+, VOL
VOL
SOUND
SOUND
OK
OK
MIC VOL
─W.SRD
-W.SRD
37).
right)
Press [SELECTOR] on the main unit to select source from the main unit.
( 37)
[Note]
Confirm the audio connection to the AUX or OPTICAL IN terminal on the
main unit when you select the corresponding sources (
volume on the TV to its minimum, and then adjust the volume of the main
unit.
Making settings for digital audio input
Select to suit the type of audio from the OPTICAL IN terminal on the main
unit.
1 While in "D-IN" mode
Press [SETUP] to select "MAIN/SAP", "DRC" or "PCM FIX".
2 While the selected mode is displayed
Press [3, 4] to make the setting.
MAIN/SAP mode (Only works with Dolby Dual Mono):
MAIN, SAP , MAIN+SAP (stereo audio)
§ §
"SAP" = Secondary Audio Program
§
Dynamic Range Compression
DRC ON: Adjust for clarity even when the volume is low by
compressing the range of the lowest sound level and the
highest sound level. Convenient for late night viewing.
(Only works with Dolby Digital)
DRC OFF: The full dynamic range of the signal is reproduced.
PCM FIX mode
PCM ON: Select when receiving only PCM signals.
PCM OFF: Select when receiving Dolby Digital and PCM signals.
(When receiving true 5.1-channel surround sound, select "PCM OFF".)
[Note]
≥ Audio that is input through the OPTICAL IN terminal is not output from
the HDMI terminal.
≥ Underlined items in the above are factory settings.
While "MANUAL" is Select other surround modes.
displayed
Each time you press [2, 1]:
PLII MOVIE
Suitable for movie software, or the one
recorded in Dolby Surround. (except [DivX])
PLII MUSIC
Adds 5.1-channel effects to stereo sources.
(except [DivX])
S.SRND
You can enjoy sound from all speakers with
stereo sources. (Surround output will be in mono.)
STEREO
Sound will be output to the front speakers and
the subwoofer only for any source.
"ÎPLII" lights in the main unit's display when there is effect.
§
Recommended modes to enjoy TV audio or stereo
sources from all speakers:
≥ PLII MOVIE
≥ PLII MUSIC
≥ S.SRND
9). Reduce the
§
§