Setting Up The Radio; Presetting Stations Automatically; Confirming The Preset Channels; Manual Tuning - Panasonic SC-PT570 Operating Instructions Manual

RQTX0229-B_eng.book Page 12 Wednesday, December 24, 2008 12:29 PM

Setting up the radio

Australia and N.Z.
PLAY MODE
1
Numbered
4
buttons
7
PLAY
PLAY MODE
MODE
-REPEAT
SEARCH
SKIP
OK
MENU
MENU

Presetting stations automatically

Up to 30 stations can be set.
[Australia]and]N.Z.]
Up to 30 stations can be set in each band, FM and AM.
1
RADIO
EXT-IN
2
MENU
PLAY
LIST
3
OK
(press and hold)
≥ "SET OK" is displayed when the stations are set, and the radio tunes to
the last preset station.
≥ "ERROR" is displayed when automatic presetting is unsuccessful.
Preset the channels manually (
12
SLEEP
2 3
5 6
8 9
10
0
RADIO
RADIO
EXT-IN
SEARCH SEARCH
,
SKIP
,
FUNCTIONS
OK
ECHO
MIC VOL
- - FL DISPLAY
W.SRD
-TUNE MODE/—FM MODE
MEMORY
SELECTOR TUNE
Select "FM".
[Australia]and]N.Z.]
Select "FM" or "AM".
≥ Main unit:
Press [SELECTOR].
Each time you press the button:
LOWEST (factory preset):
To begin auto preset with the lowest
frequency.
CURRENT:
To begin auto preset with the
current frequency.
§
To change the frequency, refer
§

"Manual tuning" (

right).
Release the button when
"FM AUTO"or [Australia]and]N.Z.]
"AM AUTO" is displayed.
≥ Main unit:
Press and hold [MEMORY].
The tuner starts to preset all the
stations it can receive into the
channels in ascending order.
13).

Confirming the preset channels

1
RADIO
EXT-IN
2
1 2 3
4 5 6
7 8 9
0 10
≥ The FM ([Australia]and]N.Z.] :FM/AM) setting is also shown on the TV
display.
If noise is excessive
When "FM" is selected
Press and hold [PLAY MODE]
(main unit: [—FM MODE]) to
display "MONO".
Press and hold the button again to cancel the mode.
≥ The mode is also cancelled when you change the frequency.
[Australia]and]N.Z.] When "FM" is selected
Press [FUNCTIONS] on the remote control.
Each time you press the button: BP 2 ,# BP 1
Manual tuning
1
RADIO
EXT-IN
2
SEARCH SEARCH
Select "FM".
[Australia]and]N.Z.]
Select "FM" or "AM".
≥ Main unit:
Press [SELECTOR].
Select the channel.
≥ To select a 2-digit number
e.g. 12: [S10] [1] [2]
Alternatively, press [X, W].
≥ Main unit:
Press [-TUNE MODE] to select
"PRESET" on the display, and
then press [X TUNE W] to select
the channel.
When a stereo FM broadcast is
being received, "ST" lights in the
display.
ST
MONO
Select "FM".
[Australia]and]N.Z.]
Select "FM" or "AM".
≥ Main unit:
Press [SELECTOR].
Select the frequency.
≥ Main unit:
Press [-TUNE MODE] to select
"MANUAL" on the display, and
then press [X TUNE W] to select
the frequency.
≥ To start automatic tuning, press
and hold [6, 5] (main unit:
[X TUNE W]) until the frequency
starts scrolling. Tuning stops
when a station is found.