Table of Contents
Advertisement
Remote-Control Transmitter
Insertion of remote-control transmitter batteries
1. Open the cover.
2. Insert the batteries.
•Be sure to insert according to the
(+) and (-) indications in the
battery compartment.
•Use two UM-4 "AAA" (R03 1.5 V)
size batteries.
3. Close the cover.
■ Battery life
Battery life is about one year. (Battery life may
vary depending upon the frequency of use and
other conditions of use.)
The batteries should be replaced if the unit
cannot be operated even when the remote-
control transmitter is brought close to the unit.
■ Battery notes
•Be sure that batteries are inserted so that
ttiey are placed correctly with respect to the
(-t-) and (-) indications hi the battery com¬
partment. If the batteries are not inserted
correctly, they may leak and damage the
remote-control transmitter.
•Do not use rechargeable (nickel-cadmium)
type battehes.
•Do not mix old ar>d r>ew batteries, or batter¬
ies of different types (carbon and alkaline,
etc.).
•If the remote-control transmitter is not to be
used for a long period of time, take out the
batteries and store them in a cool, dark
place.
•Rerrwve and dispose of worn-out batteries.
•Never attempt to recharge or short-circuit the
batteries, and do not disassemble them or
expose them to excessive heat or throw
them into a fire.
•If a battery leaks, remove both batteries and
dispose of them, and then thoroughly clean
the battery compartment before inserting
new batteries.
Remote-control transmitter operation notes
Face it toward the remote-control
signal receptor of this unit
(Obstacles should be
avoided.)
Be sure the transmitter part of the remote-control
hansmitter end the receptor part of this unit are
free from duet
Excessive dust might prevent reception.
Avoid dust.
Other notes-
1. Do not expose the receptor (on this unit)
to direct sunlight or other strong light,
because to do so might result in incorrect
operation.
2. Do not use a remote-control transmitter
for a TV set, a VCR or other \rideo
component at the same time as this
remote-control transmitter is beir)g used,
because to do so might result In incorrect
operation.
3. If this unit is installed in a rack with glass
doors, the glass doors' thickness or color
might make it necessary to use the
remote-control transmitter a shorter dis¬
tance from toe unit.
Advertisement
Table of Contents
