Setting up the radio
PLAY MODE
Numbered
buttons
OK
MENU
Presetting stations automatically
Up to 30 stations can be set.
1
RADIO
EXT-IN
2
MENU
PLAY
LIST
3
OK
(press and hold)
≥ "SET OK" is displayed when the stations are set, and the radio tunes to
the last preset station.
≥ "ERROR" is displayed when automatic presetting is unsuccessful.
Preset the channels manually (
10
10
PLAY MODE
1
2
3
4
5
6
7
8
9
0
10
RADIO
RADIO
EXT-IN
SEARCH
SEARCH
SEARCH
,
SKIP
SKIP
,
OK
MENU
-TUNE MODE/—FM MODE
SELECTOR
TUNE
Select "FM".
≥ Main unit:
Press [SELECTOR].
Each time you press the button:
LOWEST (factory preset):
To begin auto preset with the lowest
frequency.
CURRENT:
To begin auto preset with the current
frequency.
§
To change the frequency, refer to "Manual
§
tuning" (
right).
Release the button when
"FM AUTO" is displayed.
≥ Main unit:
Press and hold [MEMORY].
The tuner starts to preset all the stations it
can receive into the channels in ascending
order.
right).
Confirming the preset channels
1
RADIO
EXT-IN
2
1
2
4
5
7
8
0
≥ The FM setting is also shown on the TV display.
If noise is excessive
MEMORY
Press and hold [PLAY MODE]
(main unit: [—FM MODE]) to
display "MONO".
Press and hold the button again to cancel the mode.
≥ The mode is also cancelled when you change the frequency.
Manual tuning
1
RADIO
EXT-IN
2
SEARCH
Presetting stations manually
Up to 30 stations can be set.
1 While listening to the radio broadcast
Press [OK].
2 While the frequency is flashing on the display
Press the numbered buttons to select a channel.
≥ To select a 2-digit number
e.g. 12: [S10]
Alternatively, press [X, W],
and then press [OK].
Main unit:
1 While listening to the radio broadcast
Press [MEMORY] twice.
2 While a channel number is flashing on the display
Press [X TUNE W], and then press [MEMORY].
A station previously stored is overwritten when another station is stored in
the same channel preset.
Select "FM".
≥ Main unit:
Press [SELECTOR].
Select the channel.
3
≥ To select a 2-digit number
6
e.g. 12: [S10]
[1]
9
10
Alternatively, press [X, W].
≥ Main unit:
Press [-TUNE MODE] to select "PRESET"
on the display, and then press
[X TUNE W] to select the channel.
When a stereo FM broadcast is being
received, "ST" lights in the display.
MONO
Select "FM".
≥ Main unit:
Press [SELECTOR].
Select the frequency.
SEARCH
≥ Main unit:
Press [-TUNE MODE] to select "MANUAL"
on the display, and then press
[X TUNE W] to select the frequency.
≥ To start automatic tuning, press and hold
[6, 5] (main unit: [X TUNE W]) until
the frequency starts scrolling. Tuning
stops when a station is found.
[1]
[2]
[2]
ST