Bluetooth Mode - Blaupunkt BT02WH Owner's Manual

BT02WH
OPERATING INSTRUCTION

Bluetooth mode

1. Slide the Power ON/OFF switch to ON position to turn on the
speaker, Blue indicator will light on and blinking.
2. In first time use or re-pairing to new BLUETOOTH device,
pairing the unit to external BLUETOOTH device as below:
a. Power on the external BLUETOOTH device and enter to
searching mode, when the external BLUETOOTH device
searched the unit, the model number "BLAUPUNKT BT02" will
appear on the display of external BLUETOOTH device, Pairing
code "0000" may need to enter.
b. Start pairing as the on screen instructions on the external
BLUETOOTH device. After paired, blue indicator stop blinking.
Attention:
·Please make sure your Bluetooth device is stereo before
connection it.
·Not all the Bluetooth device is the same, so read your
Bluetooth device (such as iPhone, iPad, laptop, etc. )
instruction carefully before connection.
·If the Bluetooth is not in the match state, please reboot
speaker and the password is 0000 if necessary.
3. Play the music in the paired BLUETOOTH device as usual, the
Blue indicator will blinking slowly.
4. During music playback:
a. Press the "-" button to skip the previous music, press and
hold the"-" button to decrease volume.
b. Press the
blinking, press again to resume normal playback and the Blue
indicator will blinking slowly.
c. Press the "+" button to skip the next music, press and hold
the button to increase volume.
button to pause and the Blue indicator stop
10