Connecting The 3Cce589Ec Pc Card - 3Com 09-1457-000 User Manual

Connecting the 3CCE589EC PC Card

1 Remove PC Cards from your notebook and turn it on.
2 If you are using the RJ-45 connector, connect the PC
Card COMBO cable to the 3CCE589EC PC Card.
a Connect one RJ-45 connector on the network cable to
b Insert the other RJ-45 connector into the network port.
c Insert the PC Card into the PC Card slot and slide it all
d Go to Chapter 2 to install the network driver that allows
3 If you are using the BNC T-connector, connect the PC
Card COMBO cable
a Connect the BNC T-connector to the PC Card COMBO
You must supply your own BNC T-connector.
Figure 3 Connecting the 3CCE589EC PC Card
b Connect the BNC T-connector to the Ethernet cable
c Insert the PC Card into the PC Card slot
CAUTION: Do not force the PC Card into the slot or you
may bend the pins inside the slot.
the PC Card COMBO cable.
the way in.
You may see prompts for driver installation.
you to login to the network.
cable .
the way in.
Connecting the 3CCE589EC PC Card
to the 3CCE589EC PC Card.
3
.
and slide it all