Kenwood DDX6016BTR Instruction Manual page 61

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
❏ Connecting external components
1 NAVI I/F input*
1
2 Steering wheel remote controller input*
• Connect to the vehicle's steering remote
harness. Contact your Kenwood dealer for
details.
3 iPod/Audio Video input (iPod/AV-IN)*
4 Video output (Yellow)
5 Rear preout*
3
• Audio left output (White)
• Audio right output (Red)
6 DAB aerial input*
7 Front preout*
3
• Audio left output (White)
• Audio right output (Red)
8 Subwoofer preout*
• Subwoofer left output (White)
• Subwoofer right output (Red)
9 Rear view camera input (Yellow)
* Only for DDX4016DAB/DDX4016BT.
1
When connecting the component to play on "AV-IN", use the
* 2
Audio and Video cable CA-C3AV (optional accessory).
* 3 When connecting an external amplifier, connect its ground wire to
the chassis of the car; otherwise the unit may be damaged.
1 *
4 Only for DDX4016DAB. To use the digital radio, connect CX-DAB1
(optional accessory).
2
4
3
Connecting external amplifiers for a 3 way
speaker system
Tweeter preout
Mid range preout
Woofer preout
Speaker
RCA cable (not supplied)
*
* When connecting to an external amplifier, connect its ground wire
to the car's chassis.
ENGLISH 61