Clock Settings - Kenwood DDX6016BTR Instruction Manual

INITIAL SETTINGS INITIAL SETTINGS
5 4
Repeat step to confirm your security
code.
Now, your security code is registered.
• When the unit has been reset or disconnected
from the battery, you are required to enter the
security code. Enter the correct security code, then
press [Enter].
❏ Activating the security function
You can activate the security function to protect
your receiver system against theft.
1
Display the <System> setting screen.
On the Home screen:
• Press [ ] repeatedly to change the page on
the <System> menu screen.
2
The security indicator on the monitor panel
flashes when the vehicle ignition is off.
To deactivate the security function: Select [OFF]
for <SI>.

Clock settings

1
Display the Home screen.
On the monitor panel:
DDX6016BTR
DDX4016DAB/DDX4016BT/
DDX4016BTR
2
Display the <Clock> setting screen.
• You can also display the <Clock> setting
screen by touching the clock area on the
Home screen.
3
Set the clock time.
<NAV>* Synchronizes the clock time with
1
the connected navigation unit.
<Radio Data Synchronizes the clock time with
System>*
2 FM Radio Data System .
<DAB>* Synchronizes the clock time with
3
the digital radio (DAB).
<OFF> Sets the clock manually. (See
below.)
When selecting <OFF>:
Adjust the hour (1), then adjust the minute (2).
• Press [Reset] to set the minute to "00".
4
Finish the procedure.
*
1 Only for DDX4016DAB/DDX4016BT: Appears only when a navigation
unit is connected.
* Only for DDX6016BTR/DDX4016BT/DDX4016BTR.
2
* Only for DDX4016DAB.
3
ENGLISH 5