Operator Panel Menus - NEC Superscript 4650 User Manual

Operator Panel Menus

The Operator Panel for the 4650N(X) model printers has
eight main menus, described below. The 4650 model printer
does not include the PCL or the Advanced Features menu.
Default selections for each setting are marked with an
asterisk (*).
Control Menu
Use this menu to cancel the current print job or reset the
printer when the printer is in an error state. Selecting
restarts the printer and causes it to reinitialize and
PRINTER
perform a self-test.
RESET NIC
network interface parameters without rebooting.
CONTROL
JOB HOLD PRINT*
CONFIRM
RESET PRINTER
RESET NIC
PARAMETERS
*Default selection for the setting.
70 SuperScript 4650 Series — User's Guide
RESET
allows you to reset the
Setup Menu
Use this menu to configure the default settings for jobs that
are not sent using printer driver software, or restore the
factory default settings. The
you to set the appearance of print jobs. The
menu allows you to set printer operation settings. Select
to return printer settings to their factory
RESTORE DEFAULTS
defaults (except communications parameters).
SETUP
JOB DEFAULTS
RESOLUTION**
EDGE SMOOTHING
COPIES
MISCELLANEOUS
POWER SAVE
JAM RECOVERY
MEMORY
RESTORE DEFAULTS
submenu allows
JOB DEFAULTS
MISCELLANEOUS
600 x 600* / 1200 x 1200
ENABLE / DISABLE*
1* to 999
NEVER, 30 MIN., 1HOUR*,
1.5HOURS, 2HOURS, 3HOURS
NO / YES*
32MB, 64MB,
96MB, 128MB,
160MB, 192MB, 256MB