Port Replicator Serial Port; Port Replicator Network Port - Clevo M665JE User Manual

Concise User's Guide
Port Replicator Serial (COM) Port
1. Attach the Port Replicator as per the instructions in
"Port Replicator Module" on page
2. Insert the provided Port Replicator CD into the
computer's CD/DVD drive.
3. Click Start (menu) > Run... and navigate
(Browse...) to
D:\PL-2303 Driver Installer\PL-2303 Driver
Installer.exe and click OK.
4. Click Next > Finish.
Port Replicator Network (LAN)
1. Attach the Port Replicator as per the instructions in
"Port Replicator Module" on page
2. Insert the provided Port Replicator CD into the
computer's CD/DVD drive.
3. If you can see the My Computer icon on the desktop
(if you cannot see the My Computer icon go to step
4) click on it once to select it, then right-click it to
make the sub-menu appear and scroll down to
Properties and click on it (go to step 5).
4. If you cannot see the My Computer icon Start
(menu), then point to (but don't click it, just highlight
it) My Computer. Right-click it to make the sub-
34 - Driver Installation
menu appear and scroll down to Properties and click
on it (go to step 5).
26. 5. Click Hardware (tab), then click Device Manager
(button).
6. Click "+" next to Other devices (if its sub-menu
items are not shown).
7. Double-click AX88772 and click Driver (tab).
8. Click Update Driver (button).
9. When the Hardware Update Wizard appears, select
"No, not this time" then click Next.
10.Select "Install from a list or specific location
(Advanced)" then click Next.
11.Select "Search for the best driver in these
26. locations." and select ONLY "include this location
in the search:".
12.Navigate (Browse...) to D:\LAN and click OK >
Next.
13.Click Finish and close the open windows.