System Map: Left View - Clevo M665JE User Manual

System Map: Left View

1
Changing DVD Regional Codes
Go to the Control Panel and double-click System >
Hardware (tab), click Device Manager, then click the +
next to DVD/CD-ROM drives. Double-click on the
DVD-ROM device to bring up the Properties dialogue
box, and select the DVD Region (tab) to bring up the
control panel to allow you to adjust the regional code.
DVD region detection is device dependent, not OS-de-
pendent. You can select your module's region code 5
times. The fifth selection is permanent. This cannot be
altered even if you change your operating system or
you use the module in another computer.
2
3
If you need to manually eject a CD/DVD (e.g. due to an unexpected
power interruption) you may push the end of a straightened paper clip
into the emergency eject hole. Do not use a sharpened pencil or sim-
ilar object that may break and become lodged in the hole.
Don't try to remove a floppy disk/CD/DVD while the system is access-
ing it. This may cause the system to "crash".
Concise User's Guide
Figure 7 - Left View
1. Security Lock Slot
4 5 6 7
2. Optical Device Drive Bay
3. RJ-11 Modem Jack
4. S/PDIF-Out Jack
5. Microphone-In Jack
6. Headphone-Out Jack
7. Line-In Jack
CD Emergency Eject
Media Warning
System Map: Left View - 17