Table of Contents
Advertisement
Target Readers
Purpose
Organization
How to Read This Manual
Conventions
Terminology
INTRODUCTION
This manual is intended for users who design and develop application systems using
the V850/SV1™.
The purpose of this manual is to describe the proper operation of the IE-703040-MC-
EM1 and its basic specifications.
This manual is divided into the following parts.
• Overview
• Names and functions of components
• Cautions
It is assumed that the reader of this manual has general knowledge in the fields of
electrical engineering, logic circuits, and microcontrollers.
The IE-703040-MC-EM1 is used connected to the IE-703002-MC in-circuit emulator.
This manual explains the basic setup procedure and switch settings of the IE-
703002-MC when it is connected to the IE-703040-MC-EM1. For the names and
functions of parts, and the connection of elements, refer to the IE-703002-MC User's
Manual (U11595E).
To learn about the basic specifications and operation methods
Read this manual in the order of the CONTENTS.
To learn the operation methods and command functions, etc., of the IE-703002-MC
and IE-703040-MC-EM1
Read the user's manual of the debugger (sold separately) that is used.
Note:
Footnote for item marked with Note in the text
Caution:
Information requiring particular attention
Remark:
Supplementary information
Numeral representation: Binary
Decimal
Hexadecimal
Prefix indicating the power of 2 (address space, memory capacity):
K (kilo):
M (mega):
The meanings of terms used in this manual are listed below.
Target device
The device that is targeted for emulation.
Target system
The system (user-built system) that is targeted for debugging. This
includes the target program and user-configured hardware.
User's Manual U14337EJ1V0UM00
xxxx or xxxxB
xxxx
xxxxH
10
2
= 1024
20
2
2
= 1024
5
Advertisement
Table of Contents
