Register Addressing - NEC switch User Manual

3.4.4 Register addressing

[Function]
In the register addressing mode, general-purpose registers are accessed as operands. The general-purpose
register to be accessed is specified by the register specification code or function name in the instruction code.
Register addressing is carried out when an instruction with the following operand format is executed. When
an 8-bit register is specified, one of the eight registers is specified with 3 bits in the instruction code.
[Operand format]
Identifier
r X, A, C, B, E, D, L, H
rp AX, BC, DE, HL
r and rp can be described by absolute names (R0 to R7 and RP0 to RP3) as well as function names (X, A, C,
B, E, D, L, H, AX, BC, DE, and HL).
[Description example]
MOV A, C; When selecting the C register for r
Instruction code
INCW DE; When selecting the DE register pair for rp
Instruction code
54
CHAPTER 3 CPU ARCHITECTURE
Description
0 0 0 0 1 0 1
0 0 1 0 0 1 0
1 0 0 0 1 0 0
User's Manual U12978EJ3V0UD
0
1
Register specification code
0
Register specification code