Connecting To Your Pc Via Infrared - NEC MobilePro 790 User Manual

Click Tools, Options and verify that the desired synchronization
2.
services are checked. Modify the selections as required.
Note
checked. Be sure to select the checkbox for this service if you want to
synchronize email between your MobilePro to your host PC.
Once installed, Microsoft ActiveSync automatically synchronizes your
MobilePro 790 with your host PC's Microsoft Outlook email, contacts,
calendar, and task list each time you attach the PC Connect cable to the
MobilePro 790 and the host PC.
Note
files and email attachments during synchronization. This allows you to use
the MobilePro to view and work with files created on your host PC with
Microsoft Word, Excel, and PowerPoint, among others.
However, as noted in the readme.doc file on the Microsoft ActiveSync CD,
PowerPoint files created or modified on the MobilePro are not translated
for viewing or modification on your host PC. This limitation does not apply
to Pocket Word or Pocket Excel files.

Connecting to Your PC via Infrared

If your host PC is not equipped with a serial port or the serial port(s) is in
use, use the infrared port to synchronize the NEC MobilePro with your
host PC.
The following section provides an overview of the synchronization
process, using the infrared port, followed by detailed instructions for each
stage of the process.
Follow these procedures to configure your MobilePro for synchronization
using the infrared port.
Modify the PC Connection default settings on your MobilePro.
!
Set the infrared connection speed.
!
Enable the infrared port on your host PC.
!
Install Microsoft ActiveSync on your host PC.
!
Create a partnership between your host PC and your MobilePro.
!
1-16 Getting Started
By default, synchronization of email messages is not
Whenever possible Microsoft ActiveSync automatically translates