Thrustmaster Ferrari GT Experience User Manual page 7

Steps
1
CONFIGURING THE PEDALS ON PLAYSTATION®3
On PlayStation®3, your wheel's accelerator and brake controls are in "separate" mode by default,
meaning that the pedals function on independent axes:
"Accelerator" = "R2" trigger & "Brake" = "L2" trigger
For a different type of control (to limit skidding, for example), you can switch your wheel to "combined" (2
axes) mode: the pedals then function on a single axis.
"Accelerator and Brake" = Up/Down direction on "Right mini-stick"
the 2 pedals (14) + the "Home" button (6)
(You must repeat this procedure each time you restart or disconnect your wheel)
Erasing your programming
Action
Press and hold for 2 seconds:
SE + ST (5)
Your programming has now been erased.
Setting "Combined Pedals" mode
Action
Simultaneously press and release:
Your pedals are now combined
6/10
LED color
TURNS OFF
THEN ON AGAIN
LED color
GREEN