Table of Contents
Advertisement
WHEN USING THE UNIT AS A FRAME SWITCHER
VCR Playback Mode
While viewing live camera pictures, start playback on the VCR, then press the VCR button to view the VCR
playback image on the monitor. If a camera picture is not recorded on the tape, the message "NO VIDEO" will be
displayed. To return to camera live pictures, press the LIVE button.
Also, if playing back a tape not recorded through this unit or if the recording was made
with "MULTI MODE" set to "ON", the VCR indicator will flash and the message "NO ID"
will be displayed on the monitor screen.
NOTES:
•
During playback from a timelapse/real time VCR in 12 or 24H mode the audio may not be in sync with the
viewed image.
•
We recommend to use the 8H speed if using a real time VCR. Depending on the real time VCR model, there
may be a slight vertical shaking of the image or the top of the image may be slightly distorted during playback
in 24 or 40H mode.
b For split screen viewing (See page 11)
(7 divisions)
(10 divisions)
b For full screen image viewing (See page 11)
b For x2 zoomed in image viewing (See page 12)
b For freezed image viewing (See page 13)
b For 4 split screen sequential viewing (See page 13)
(Screens 1 to 4)
10
b For full screen sequential viewing (See page 11)
(Freeze frame)
NO VIDEO
10
(Screens 5 to 8)
(x2 zoom)
(x2 zoom)
NO VIDEO
NO VIDEO
NO ID
NO VIDEO
NO VIDEO
(Screens 9 and 10)
(Freeze frame)
(Freeze frame)
ZS
ZS
English
Advertisement
Table of Contents
