Basic Functions; Switching Modes; Displaying And Erasing The Menus, And Switching Between Split Screen And Full Screen - Sanyo MPX-MS10P Instruction Manual

BASIC FUNCTIONS

Using this unit you can monitor in split screen or full screen mode, according to the received camera input mode, the
image from all the cameras connected.
Also, the image from the cameras can be recorded using a VCR, then played back by switching to VCR playback
mode. The setup of convenient functions such as the date, the time, a user set title indicating the monitoring location
or alarms, the VCR operations, etc. can be easily done using on-screen menus.

Switching Modes

When the unit is first used, it will be in camera image
viewing mode, and the camera image will be displayed
full screen on the monitor. To switch to a different
mode, follow the steps below.
Press the VCR button to select the VCR
playback mode.
If the images from the cameras have been correctly
recorded, playback will start in one of the modes
illustrated below.
Press the LIVE button to select the full
LIVE
screen camera live picture viewing.
To switch to split screen viewing, please refer to
"Displaying and erasing the menus, and
switching between split screen and full screen".
(MULTI MODE: ON)
Press the MENU button to display the main
MENU
menu.
For setup using the menus, please refer to
"Displaying and erasing the menus, and
switching between split screen and full screen".
English
(MULTI MODE: OFF)
7
Displaying and Erasing the Menus,
and Switching Between Split Screen
and Full Screen
1
Press the MENU button to display the main menu.
2
Press the O button to select "4. DISPLAY SET
OTHER", then press the MENU button.
3
Press the O button to select "MULTI MODE", then
press the + (or –) button to select "ON" or "OFF".
ON:
For 10 divisions split screen display
To use the unit as a Multiviewer.
For the multiviewer operations, please refer to
page 14.
OFF:
For full screen display
To use the unit as a frame switcher.
For the frame switcher operations, please refer
to page 9.
4
Press the MENU button, then press the O button to
select "7. ENTER" and press the MENU button
again.