Multi Screen Operations; Showing A Couple Of Pictures On The Screen At The Same Time; Operations In The Side-By-Side Mode - NEC PlasmaSync 50MP2 User Manual

MULTI SCREEN Operations

Showing a couple of pictures on the
screen at the same time
* An RGB-input picture may not be displayed in these modes,
depending on the input signal specifications.
1. Press the MULTI button to select a screen mode from
among single mode, side by side, and picture in picture.
Side by side
VIDEO1
A
Note:
Picture A and B on the above screen are not always of the
same height.
Picture in picture
VIDEO1
Sub
screen
Information
Multi screen operations may not function depending
on the combination of input signals. In the table below,
" " means Yes, " " means No.
Pictures displayed on the right/main screen
VIDEO1 VIDEO2 VIDEO3
Pictures
VIDEO1
displayed on
VIDEO2
the left/sub VIDEO3
screen
HD/DVD1
HD/DVD2
RGB/PC1
RGB/PC2
RGB/PC3
Multi screen operations may not function
depending on the type of the RGB signals.
RGB/PC1
B
RGB/PC1
Main screen
HD/DVD1 HD/DVD2 RGB/PC1 RGB/PC2 RGB/PC3

Operations in the Side-by-side mode

To change the picture size, press the cursor
VIDEO1
A
button
VIDEO1
A
button
VIDEO1
To swap the picture on the right and the left, press the
cursor button.
VIDEO1
A
RGB/PC1
B
To make the desired picture active, press the SELECT
button.
VIDEO1
A
VIDEO1
A
16
or button.
RGB/PC1
B
button
RGB/PC1
B
button
RGB/PC1
A
B
RGB/PC1
B
button
VIDEO1
A
RGB/PC1
B
SELECT button
RGB/PC1
B