Reducing noise in the picture
Use these settings if the picture has noise due to poor
reception or when playing video tapes on which the picture
quality is poor.
Example: Setting "NR-3"
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the L and M buttons to select "PICTURE", then
press the PROCEED button.
The "PICTURE" screen appears.
2. Use the L and M buttons to select "NR".
P I C T U R E
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
COLOR TEMP.
NR
SEL.
ADJ.
3. Use the
and
The mode switches as follows when the
buttons are pressed:
→ OFF ↔ NR-1 ↔ NR-2 ↔ NR-3 ←
NR
* If neither the
or
button is pressed within 5 seconds,
the current selection is set and the previous screen
reappears.
R
G
: MEMORY
: 2
:
OFF
EXIT
RETURN
buttons to select "NR-3".
and
:
NR-3
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
NR
* "NR" stands for Noise Reduction.
* This function reduces noise in the picture.
Types of noise reduction
There are three types of noise reduction. Each has a
different level of noise reduction.
The effect becomes stronger as the number increases
(in the order NR-1 → NR-2 → NR-3).
OFF ............... Turns the noise reduction function off.
24