Omron HEA-232 Instruction Manual page 12

Blood glucose monitoring system
Table of Contents

Advertisement

10
OMRON blood glucose monitoring system HEA-232.indd 10
3. Ready to test
W h e n y o u s e t t h e c o r r e c t c o d e n u m b e r, p l e a s e w a i t f o r 5
seconds, and the meter will display with
please apply blood sample within 2 minutes.
E. Fingertip blood sampling
Please massage your fingertip gently to help you obtain blood.
We suggest that you puncture a different area each time.
Repeated punctures in the same area may cause soreness. The
blood sample required is only 1μL, do not squeeze excessively
at the puncture area.
The HEA-232 will display the code number on the screen
w h e n w a i t i n g f o r t h e b l o o d t o d r o p i n , t h e u s e r n e e d s t o
make sure the code number is the same as that of the strip
container.
F. Blood glucose measurement
Hold the lancing device firmly against the side of your fingertip.
Press release button; gently squeeze your finger to assist the
flow of blood.
Apply a drop of blood to the tip of the reaction zone of the test
strip after the blood drop symbol
You will hear "beep" and the meter will start to count down. The
test result will appear on the display after the meter counts down
from 5 to 1 (5 seconds). The meter will turn off automatically
after the test strip is removed. Place the used strip in a suitable
container for proper disposal.
symbol. And then
flashes on the meter display.
2012/6/13 下午 06:44:25

Advertisement

Table of Contents
loading

Table of Contents