Table of Contents
Advertisement
12
OMRON blood glucose monitoring system HEA-232.indd 12
H. Blood glucose value display:
The blood glucose test will be performed in 5 seconds when the
blood drops into the test strip. The test result will automatically
be stored in the meter memory.
P l e a s e d i s p o s e o f u s e d t e s t s t r i p a n d l a n c e t i n a s e a l e d
◆
container to avoid
Important:
□ Do not use a single test strip more than once.
□ It should not be used for testing newborns.
□ It should be used only for testing fresh capillary whole blood
samples drawn from the fingertips only.
□ It should not be used for venous whole blood or plasma.
□ A red blood cell count (hematocrit) that is higher than 55%
or lower than 30% may cause false test results.
Chapter 4: Glucose Control Solution Testing
(Optional)
4.1 Control test
In order to provide you a precise blood glucose value, we suggest the
user to run a control test to let you know if the meter and test strips
are working properly or not. When the result is within the range of the
control solution value written on the test strip vial, the test strips and
meter are working properly.
When to run the glucose control solution test:
You think your test strips have been damaged.
Test result is not compatible with how you feel..
You think your glucose meter could be brok en.
If you will like to perform control solution test or have any
question, please contact your local authorized distributor for
more information.
environmental pollution.
2012/6/13 下午 06:44:26
Advertisement
Table of Contents
