Table of Contents
Advertisement
Connecting the PC as a monitor
Sound adjustment
1. Press the MENU button.
2. Select the Sound menu, then press VOLÏq.
3. Press the PRxy button to select the desired
sound item; Equalizer, Balance, AVL, Surround or
Sound Mode.
4. Press the VOLÏq button to make desired adjustment.
5. Press the VOLÏq button in Equalizer to set the
Equalizer.
6. Press the PRxy button to select your preferred
setting ; Flat, Music, Movie, Speech or User.
To set the Equalizer User.
a. Select User by pressing the PRxy button.
b. Select a sound band by pressing the VOLÏq
button.
c. Make appropriate sound level with the PRxy
button.
d. Press the MENU button to return to preceding
menu.
7. Press the PRxy button to the Balance menu.
8. Select the Balance menu with the VOLÏq button and adjust the balance of speaker.
9. Select the AVL(Automatic Volume Leveler) menu ON or OFF.
10. Select the Surround menu ON or OFF.
11. Select the Sound Mode with PRxy button.
12. Press the VOLÏq button to select sound mode – L+R, L+L, R+R.
L+R : Audio signal from audio L input is sent to left loudspeaker and audio signal
from audio R input is sent to right loudspeaker.
L+L : Audio signal from audio L input is sent to left and right loudspeakers.
R+R : Audio signal from audio R input is sent to left and right loudspeakers.
13. Select the Input with PRxy button.
14. Press the VOLÏq button to select Input – PC, Radio.
In PIP mode, you can select PC or PIP Input.
Note:
a. When selecting radio mode, sound mode alternates between MONO and
STEREO according to the received signal.
b. In PC mode, radio mode supports only Auto.
c. In PC mode, radio control function is on an equality with Radio function in
the front.(See page 20)
26
Sound
q
Equalizer
Balance
0
AVL
Off
Surround
Off
Sound Mode
L+R
Input
PC
Position :▲▼
Next :◀▶
Back : MENU
Exit : TV/AV
Equalizer
Flat
Music
Movie
Speech
User
0.1 0.5 1.5 5.0 10KHz
Position :▲▼
Back : MENU
Exit : TV/AV
Advertisement
Table of Contents
