Radio Control - NEC NLT-32W User Manual

32" tft lcd tv
Hide thumbs Also See for NLT-32W:
Table of Contents

Advertisement

Radio Control

This function is possible only when the set is in Radio mode.(Radio mode is displayed
when the Setting for special menu is radio On.)
1. Use TV/AV button on remote controller to select
Radio mode.
2. Press the MENU button to set Radio Setup menu.
3. Press the VOLÏq button repeatedly to select
Mode Auto or Manual.
* When the Radio Setup Mode is Auto, only the
programmes stored in memory are selected.
* When the Radio Setup Mode is Manual, all frequencies
are selected.
4. Press the PRxy button select Frequency.
Then press the VOLÏq button repeatedly to tune in the
desired station manually. If you press the VOLÏq button
continually above 2 seconds, It automatically changes
present frequency into next frequency.
5. Press the PRxy button to select Programme.
Then press the VOLÏq button repeatedly to select programme.
6. Press the PRxy button to select memorize. If you want
to memorize this radio setup, press the VOLÏq button.
7. Press the PRxy button to select Delete. Select Off
with the VOLÏq button to delete the station.
8. Press the PRxy button to select Auto Programme.
9. Press the VOLÏq button
repeatedly to automatically
scans and tunes to the next
available station.
10. Press the PRxy button to
select Off Time. Then press the
VOLÏq button repeatedly to
select Off, 5, 10, 30(minutes).
The on-screen displays disappear
after time selected.(when you
select Off, the on-screen displays
will not disappear.)
The displays identifies the
status of radio settings.
11. Press the PRxy button to
select Edit Name.
Then press the VOLÏq
button to edit radio name.
12. You can assign a radio name with 8 characters.
Press the PRxy button repeatedly. You can use the
numeric 0 to 9, the alphabet A to z(capital and small letters.) and a blank.
With the VOLÏq button, you can select in the opposite direction.
13. Press the MENU button to return to prior menu.
14. Press the TV/AV button to exit. Then the radio setting condition is displayed.
Note. You can listen to the radio while you are at PC mode. Simply go to the PC mode,
and then press MENU, select the SOUND menu, and then change the INPUT
item to the RADIO.
Please ensure that the antenna is connected and the RADIO selection
is ON at the SPECIAL menu.
Radio Auto Programme
Start
Start :◀▶
Back : MENU
Exit : TV/AV
Radio Name Edit
Station
P01
--------
Adjust : ▲▼◀▶
Confirm: OK
Back : MENU
Exit : TV/AV
Radio Setup
Mode
Auto
Frequency
87.5 MHz
Programme
Memorize
Delete
Auto Programme
Off Time
Off
Edit Name
Name
--------
Position :▲▼
Next :◀▶
Exit : TV/AV
1
19

Advertisement

Table of Contents
loading

Table of Contents